The CB1100 Community Forum
Highway pegs/sliders question - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Highway pegs/sliders question (/showthread.php?tid=9557)

Pages: 1 2 3

RE: Highway pegs/sliders question - Lord Popgun - 11-20-2015

Hummm, shows up for me.

RE: Highway pegs/sliders question - hdvalente_imp - 11-20-2015

(11-20-2015, 05:19 AM)Lord Popgun_imp Wrote: Hummm, shows up for me.

I had to refresh the page a couple of times and then they showed up.
Thanks popgun!
(02-19-2015, 07:41 AM)EmptySea_imp Wrote: I haven't decided, yet, but I agree with your notion that extending the sliders could create a situation in which they shear off rather than slide. However, my original thoughts were concerned more with creating a de facto highway peg that would have the added benefit of possibly protecting the engine covers in the event of a drop. So, it could be possible that I would take the risk of the sliders breaking off IF the offset to that risk was having a comfy place for my feet.

At the moment, I'm leaning toward engine guards like yours, MG, and maybe adding a folding highway peg to them.

Right now, however, I'm saving my money for a gear indicator.

I am in the same situation as you are, EmptySea. I want the sliders and a place to stretch my legs as well.
I came across these frame sliders that will be available mid December:
http://www.satoracing.com/framesliders_hondaCB1100.htm
Since they are not super expensive I will probably get them.

RE: Highway pegs/sliders question - Unterseeboot_imp - 11-28-2015

(01-27-2015, 03:10 PM)EmptySea_imp Wrote: What I think I might like to do: add highway pegs to my bike that are strong enough to protect my bike in the event of a drop OR add sliders that are long enough and positioned in a manner in which they could serve as highway pegs.

What I don't want to do: fabricate mounting plate or brackets. Add crash bars.

Any thoughts, links, or pics on this subject?

Thanks!
Black SW-MOTECH engine guards and Kuryakyn offset highway pegs mounted to the bottom frame tubing.


Sent from my SAMSUNG-SM-N900A using Tapatalk
For some reason, unable to post pics.

Sent from my SAMSUNG-SM-N900A using Tapatalk

RE: Highway pegs/sliders question - capttwb136_imp - 11-28-2015

I hesitate to mention this because I can't remember the source, however it was in one of the motorcycle magazines. This guy said sliders often cause more damage than would have occurred without them on the street. The article sounded pretty convincing. I just thought I'd mention it.
(01-28-2015, 01:17 PM)drswan92028_imp Wrote:
(01-27-2015, 03:10 PM)EmptySea_imp Wrote: What I think I might like to do: add highway pegs to my bike that are strong enough to protect my bike in the event of a drop OR add sliders that are long enough and positioned in a manner in which they could serve as highway pegs.

What I don't want to do: fabricate mounting plate or brackets. Add crash bars.

Any thoughts, links, or pics on this subject?

Thanks!

I made my own brackets real easy and added Kuryakyn Large ISO-Pegs. Two holes for the mounting bolts that are already on the bike and one for the pegs. I painted them black and make sure you put heavy lock tight on the bolts or the pegs will loosen.

Dave

I made my own brackets real easy and added Kuryakyn Large ISO-Pegs. Two holes for the mounting bolts that are already on the bike and one for the pegs. I painted them black and make sure you put heavy lock tight on the bolts or the pegs will loosen.

Dave Real nice job, Dave. They look good and very functional.

RE: Highway pegs/sliders question - KennyB_imp - 11-29-2015

(01-27-2015, 03:10 PM)EmptySea_imp Wrote: What I think I might like to do: add highway pegs to my bike that are strong enough to protect my bike in the event of a drop OR add sliders that are long enough and positioned in a manner in which they could serve as highway pegs.

What I don't want to do: fabricate mounting plate or brackets. Add crash bars.

Any thoughts, links, or pics on this subject?

Thanks!
You might consider these from T-Rex Racing.

RE: Highway pegs/sliders question - rbike_imp - 11-29-2015

What is the black half-moon engine case cover in the photos?

Has anyone added foot pegs with the Honda engine crash guards?

RE: Highway pegs/sliders question - KennyB_imp - 11-29-2015

(11-29-2015, 04:49 AM)rbike_imp Wrote: What is the black half-moon engine case cover in the photos?

Has anyone added foot pegs with the Honda engine crash guards?

Those are black half-moon engine case covers (sorry, couldn't help it!) Also from T-Rex Racing.

RE: Highway pegs/sliders question - White Dog_imp - 11-30-2015

(11-29-2015, 04:49 AM)rbike_imp Wrote: What is the black half-moon engine case cover in the photos?

Has anyone added foot pegs with the Honda engine crash guards?
Yes, I have Kury off-set arms and pegs mounted to the OEM engine guards. Caveat: there is limited area to mount the arms. I've just about worn out the bolts trying to get the pegs "just right". If you haven't bought the OEMs yet, consider the Motech guards from Twisted Throttle or possibly the Chinese knock-offs on ebay in black or chrome. Once I hear back from the Chinese as to the diameter, I'll decide if I want to buy theirs or the Motechs. The Motechs are pricey, IMO. Motechs, I am told, measure 1 1/32" diameter which should accomodate 1" clamps. That is the diameter of the Honda bars and my Kury arms fit very tightly.