LED turn signals - Printable Version

LED turn signals - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: LED turn signals (/showthread.php?tid=7996)

Pages: 1 2 3 4

RE: LED turn signals - Juancho76_imp - 04-04-2021

(04-04-2021, 12:02 PM)mvk24_imp Wrote:
(04-04-2021, 12:00 PM)Juancho76_imp Wrote: I have recently added the posh led relay. I also opted to add the motogadget pins for the front turn signals and motogadget disc for rears.

Good news...they do not hyperflash! Relay works great.

However, I do have a new issue.

Front pin leds, turn signals, hazards and running lights, GOOD.

Rear disc leds, turn and hazard good...NO running lights?

Now to figure out why? Anyone have similar issue and solutions?
The rear turn signals are not running lights 9n our bike, only the front turn signals are running lights.

Sent from my SM-G965U1 using Tapatalk

RE: LED turn signals - mvk24_imp - 04-04-2021

(04-04-2021, 12:10 PM)Juancho76_imp Wrote:
(04-04-2021, 12:02 PM)mvk24_imp Wrote:
(04-04-2021, 12:00 PM)Juancho76_imp Wrote: I have recently added the posh led relay. I also opted to add the motogadget pins for the front turn signals and motogadget disc for rears.

Good news...they do not hyperflash! Relay works great.

However, I do have a new issue.

Front pin leds, turn signals, hazards and running lights, GOOD.

Rear disc leds, turn and hazard good...NO running lights?

Now to figure out why? Anyone have similar issue and solutions?
The rear turn signals are not running lights 9n our bike, only the front turn signals are running lights.

Sent from my SM-G965U1 using Tapatalk
The rear turn signals are not running lights 9n our bike, only the front turn signals are running lights.

Sent from my SM-G965U1 using Tapatalk
Well....that information would have saved me considerable time and cussing had I asked hours ago! Lol

Thanks, it did cross my mind but for some reason I thought they were constant running before I cut them.

Appreciate your reply!

The rear turn signals are not running lights 9n our bike, only the front turn signals are running lights.

Sent from my SM-G965U1 using Tapatalk
Well....that information would have saved me considerable time and cussing had I asked hours ago! Lol

Thanks, it did cross my mind but for some reason I thought they were constant running before I cut them.

Appreciate your reply! No prob! The only light that should be a running light on the rear is the tail light.

How was it wiring those bar end turn signals? Did you drill the bars?

Sent from my SM-G965U1 using Tapatalk

RE: LED turn signals - Juancho76_imp - 04-04-2021

I realized after removing the factory lights I had to fill the voids.
I chose the pins in the previous front light location. Rear lights were replaced with the disc.

I did play with the idea of adding the bar ends but chose not to last minute. The old location of lights would need to be cut off and painted. Maybe down the road I'll add to the bar ends?

I'll add some pics when completed

RE: LED turn signals - mvk24_imp - 04-04-2021

(04-04-2021, 12:39 PM)Juancho76_imp Wrote: I realized after removing the factory lights I had to fill the voids.
I chose the pins in the previous front light location. Rear lights were replaced with the disc.

I did play with the idea of adding the bar ends but chose not to last minute. The old location of lights would need to be cut off and painted. Maybe down the road I'll add to the bar ends?

I'll add some pics when completed

Ah okay so you used the bar end disc's on the original factory mounting locations?

Sent from my SM-G965U1 using Tapatalk

RE: LED turn signals - danz76_imp - 11-10-2021

Will one posh flasher relay suffice for all 4 blinker lights?
Or will I need one for the fronts and one for the rears?

RE: LED turn signals - Lord Popgun - 11-10-2021

Just one. It replaces the OEM module.

RE: LED turn signals - olafurarason_imp - 11-03-2022

Hi. Can you please share your experience and tell me if this 90015-WR POSH flasher unit will fit CB1100 EX 2016?

https://japan.webike.net/products/24231555.html

On webike web site it´s indicated for 2010 - 2014 but often it will fit newer models. I just want to be sure before purchase.

BTW. Why is the 2016 model being dropped so often in web spare parts stores?

Thanks in advance.

RE: LED turn signals - Lord Popgun - 11-03-2022

It should fit. However, one member in Denmark installed one and noticed his front blinkers were on all the time. In the US front signals must be on all the time and flash when the signal is activated. The Posh unit works like the stock US unit for lighting.

I don’t know about your country, but be ready for the fronts to be on all the time. The flasher module does all this and is internally wired or programmed to do so. The OEM unit is different in different countries, depending on their laws.

RE: LED turn signals - olafurarason_imp - 11-03-2022

(11-03-2022, 05:59 AM)Lord Popgun_imp Wrote: It should fit. However, one member in Denmark installed one and noticed his front blinkers were on all the time. In the US front signals must be on all the time and flash when the signal is activated. The Posh unit works like the stock US unit for lighting.

I don’t know about your country, but be ready for the fronts to be on all the time. The flasher module does all this and is internally wired or programmed to do so. The OEM unit is different in different countries, depending on their laws.

Thank you for your answer. In my country it´s not legal obligation to have the front signals on all the time. Are there another led flasher modules around without this deficiency that can be used instead of this Posh one?

RE: LED turn signals - Lord Popgun - 11-03-2022

As far as I know, and have seen on the board, the Posh unit is the only one. And I thought they had discontinued it some time ago.