The CB1100 Community Forum
Emgo fairing - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Emgo fairing (/showthread.php?tid=9062)

Pages: 1 2 3 4 5 6 7 8 9

RE: Emgo fairing - Huladog_imp - 05-17-2016

Now you've gone and made me order one from eBay! At that price might as well give it a shot since I used to have the way more expensive Road Comet on my 2013 but didn't want to spend that kind of $$ again so this option should work well on my black 2014.

To answer the question above on which model to look for?

Use this in your search "EMGO Venom Mark II Fairing". Found mine for about $54.00 with free shipping.

I might have a nice Dart Flyscreen up for sale soon if this works well!

Aloha,
Huladog

RE: Emgo fairing - aschem_imp - 05-17-2016

Capt.,
Which knee/tank pads do you have? I think I would like to have a set like yours.

RE: Emgo fairing - capttwb136_imp - 05-17-2016

(05-17-2016, 08:06 AM)aschem_imp Wrote: Capt.,
Which knee/tank pads do you have? I think I would like to have a set like yours.
http://www.ebay.com/itm/Triumph-Tank-Knee-Pads-Smooth-Thruxton-Bonneville-Scrambler-Motone-T100-SE-/162052452104?fits=Make%3ATriumph

Here you go. I got them on ebay.
(05-17-2016, 03:37 AM)treytexag_imp Wrote: Cap'n, which model number is it? Is it the Emgo Venom Fairing mk 1 or mk 2 or which one did you buy? Please advise sir. Thanks.

[url=http://www.ebay.com/itm/Venom-MK-II-Cafe-Racer-Drag-Racing-Fairing-Windshield-Fits-7-Round-Headlights-/191186649225?hash=item2c839cc089:g:DAYAAOxyx0JTfOO4&vxp=mtr]http://www.ebay.com/itm/Venom-MK-II-Cafe...O4&vxp=mtr

This one. You can find one with free shipping for about 54 dollars.
(05-17-2016, 03:37 AM)treytexag_imp Wrote: Cap'n, which model number is it? Is it the Emgo Venom Fairing mk 1 or mk 2 or which one did you buy? Please advise sir. Thanks.

Trey, did you get my PM?

RE: Emgo fairing - capttwb136_imp - 05-17-2016

(05-17-2016, 03:52 AM)Inhouse Bob_imp Wrote: When using the original headlight bolts, did you put spacers between the headlight brackets and the fairing or bow the fairing in so that the bolts would reach? Or neither? Mine has about a quarter inch between the fairing and the headlight bracket on each side.
I didn't add a bottom brace, but the side bolts seem to hold it firmly enough so as not to rotate at high speed. May add one later.
Thanks for the writeup. I need to be better about sharing Shy

No, I didn't put any spacers in. I thought about rubber washers, but thought the stock headlight bucket screws would be too short. It seems to be mounted really secure with no vibration at all. It was pretty flexible so I don't think that 1/4" will matter. At least I hope not.

RE: Emgo fairing - Inhouse Bob - 05-17-2016

(05-17-2016, 02:53 PM)capttwb136_imp Wrote:
(05-17-2016, 03:52 AM)Inhouse Bob_imp Wrote: When using the original headlight bolts, did you put spacers between the headlight brackets and the fairing or bow the fairing in so that the bolts would reach? Or neither? Mine has about a quarter inch between the fairing and the headlight bracket on each side.
I didn't add a bottom brace, but the side bolts seem to hold it firmly enough so as not to rotate at high speed. May add one later.
Thanks for the writeup. I need to be better about sharing Shy

No, I didn't put any spacers in. I thought about rubber washers, but thought the stock headlight bucket screws would be too short. It seems to be mounted really secure with no vibration at all. It was pretty flexible so I don't think that 1/4" will matter. At least I hope not.

No, I didn't put any spacers in. I thought about rubber washers, but thought the stock headlight bucket screws would be too short. It seems to be mounted really secure with no vibration at all. It was pretty flexible so I don't think that 1/4" will matter. At least I hope not. Thanks!

RE: Emgo fairing - capttwb136_imp - 05-18-2016

(05-15-2016, 05:27 AM)The ferret_imp Wrote: Looking good capt!

Thanks Mickey!
(05-15-2016, 05:51 AM)Cormanus_imp Wrote: Yes. Definitely looking good.

Thanks Cormanus!
(05-17-2016, 02:35 AM)Papa Weeley_imp Wrote: Great looking fairing, really complements the lines of that black bike - glad you could get it to work. Nice looking bike, too! Thumbs Up

Thanks Papa!

RE: Emgo fairing - mattmcuomo@yahoo.com - 05-18-2016

Dang you all, making me spend more money on this bike! Lol. I ordered one from Moto Part Hub for $55.55 shipped.

Sent from me......

RE: Emgo fairing - Lord Popgun - 05-18-2016

55 bucks is pocket change on this bike. Tongue Big Grin

RE: Emgo fairing - mattmcuomo@yahoo.com - 05-18-2016

Agreed. But I'll be replacing my 190 dollar Flyscreen!

Sent from me......

RE: Emgo fairing - kennyw - 05-18-2016

(05-18-2016, 04:28 AM)MMC_imp Wrote: Dang you all, making me spend more money on this bike! Lol. I ordered one from Moto Part Hub for $55.55 shipped.

Sent from me......
I hope your order goes better than the reviews on that place... 7 out of 8 reviews on Google were 1 star.

https://www.google.com/search?q=Moto+Part+Hub&oq=Moto+Part+Hub&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8#lrd=0x880fc0c81e8f0219:0xbe3dc5681721dc43,1,,