(08-02-2023, 03:59 AM)Gone in 60_imp Wrote: My spare was cut from a JMA key. The designation on the back says "HOND 33"

Just don't make my mistake when you get yours cut... don't stand there in front of the locksmith turning the key, expecting it to start the engine, and then complain to the locksmith that the key doesn't work. He'll roll his eyes and say "You know you have to push that button on the handlebar to start it, right?"

(08-02-2023, 03:47 AM)mvk24_imp Wrote:

(08-02-2023, 03:45 AM)pekingduck_imp Wrote: The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

(08-02-2023, 04:12 AM)pekingduck_imp Wrote:

(08-02-2023, 03:47 AM)mvk24_imp Wrote:

(08-02-2023, 03:45 AM)pekingduck_imp Wrote: The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

(08-02-2023, 04:20 AM)Gone in 60_imp Wrote: I just called around my area and found a dedicated locksmith shop who cut the key using one of my originals. I got the blank from Ebay.

(08-02-2023, 04:17 AM)mvk24_imp Wrote:

(08-02-2023, 04:12 AM)pekingduck_imp Wrote:

(08-02-2023, 03:47 AM)mvk24_imp Wrote:

(08-02-2023, 03:45 AM)pekingduck_imp Wrote: The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

(08-02-2023, 04:29 AM)pekingduck_imp Wrote:

(08-02-2023, 04:17 AM)mvk24_imp Wrote:

(08-02-2023, 04:12 AM)pekingduck_imp Wrote:

(08-02-2023, 03:47 AM)mvk24_imp Wrote:

(08-02-2023, 03:45 AM)pekingduck_imp Wrote: The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
They use a tracing or duplicating machine.

Yamaha does not provide keys directly, instead directing their dealer to make inquiries to:

https://www.championkeys.com/product/keys-by-code/

They cut keys by code. I have spoken with them, and they can cut the new 2017 CB1100EX "wave-cut" keys.
Price is currently $45, a bargain if you've done the unthinkable.

(08-02-2023, 04:22 AM)mvk24_imp Wrote:

(08-02-2023, 04:20 AM)Gone in 60_imp Wrote: I just called around my area and found a dedicated locksmith shop who cut the key using one of my originals. I got the blank from Ebay.

That makes sense thats what I think they told me to do when I got my blank from the dealer.

Mind saying how much the locksmith charged you? I think I got quoted a price that I laughed at and thats why I never got it done

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

(08-02-2023, 04:35 AM)The ferret_imp Wrote: My 2014 spare key is an Ilco HD 109 cut by Mr Lock for like $4, I carry it in my wallet.