The CB1100 Community Forum
Corbin seat fitment question - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Corbin seat fitment question (/showthread.php?tid=5018)

Pages: 1 2

RE: Corbin seat fitment question - peterbaron - 02-12-2019

(02-12-2019, 05:55 AM)Houtman_imp Wrote: I have a 2013 ABS , a 2014 DLX and a 2017 EX ; all with a Corbin seat. Because of being 6 ft I ordered for all these bike the higher version.
They all fit perfectly and if anything there is a slightly larger gap on the 2017 between tank and seat.
On all the tanks I did put a small strip of Snyders painters tape (clear ) to prevent belt buckles or zippers from scratching the tank but that probably is not needed .

John, can you picture'em = all three please, thanks

RE: Corbin seat fitment question - Houtman_imp - 02-12-2019

I will take pictures tomorrow and will email them to Cormanus , we are not smart enough to post them !

RE: Corbin seat fitment question - Randy B - 02-12-2019

This is mine the day I got the seat on my 13 at Corbin.

[Image: a2792b69e5a299eaf4b9358030ec8851.jpg]

RE: Corbin seat fitment question - GoldOxide_imp - 02-12-2019

Hmmm, slick-lookin' saddle in that angle. Thanks RB.

RE: Corbin seat fitment question - Cormanus - 02-13-2019

In the UK certain business are allowed to use the Royal Warrant which gives them the right to say something like "By appointment to Her Majesty, Queen Elizabeth II, suppliers of Internet photographic posting services" under a picture of the royal coat of arms. Substitute "Houtman" for QEII and Cormanus has earned a warrant.

Herewith, photos of Houtman's Corbin seats.

[url=https://postimg.cc/MvwXJMnt][Image: 34494930674040361aed99bd59cbac02.jpg]

[url=https://postimg.cc/0bCjkkmv][Image: c83f93df56d015ab4b564b1cbdcd8579.jpg]

[url=https://postimg.cc/LJ6XhcB1][Image: bff3da56d8de58c1cc8b16f341442cdb.jpg]

I'm guessing, but I think they're in order: 2013, 2014, 2017.

RE: Corbin seat fitment question - Houtman_imp - 02-13-2019

(02-13-2019, 07:56 AM)Cormanus_imp Wrote: In the UK certain business are allowed to use the Royal Warrant which gives them the right to say something like "By appointment to Her Majesty, Queen Elizabeth II, suppliers of Internet photographic posting services" under a picture of the royal coat of arms. Substitute "Houtman" for QEII and Cormanus has earned a warrant.

Herewith, photos of Houtman's Corbin seats.

[url=https://postimg.cc/MvwXJMnt][Image: 34494930674040361aed99bd59cbac02.jpg]

[url=https://postimg.cc/0bCjkkmv][Image: c83f93df56d015ab4b564b1cbdcd8579.jpg]

[url=https://postimg.cc/LJ6XhcB1][Image: bff3da56d8de58c1cc8b16f341442cdb.jpg]

I'm guessing, but I think they're in order: 2013, 2014, 2017.
Thanks again George !!!

the order is 2017-2014 and 2013
As you can see the biggest gap is on the 2017 but also enough room on both others , see also Snyders Paint Guard on the tanks.

RE: Corbin seat fitment question - peterbaron - 02-13-2019

thank you both

RE: Corbin seat fitment question - GoldOxide_imp - 02-13-2019

Nice close-ups. Thanks guys. Should clarify any gap questions.