The CB1100 Community Forum
Strange wizzing noise - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Strange wizzing noise (/showthread.php?tid=4731)

Pages: 1 2 3


RE: Strange wizzing noise - LoyalKhan664_imp - 09-25-2020

So I tried to replicate it today on the stand but no success. It only does it when accelerating under load which leads me to think it might be a bearing. I’ll take it to the shop. Thanks for the advice guys!


RE: Strange wizzing noise - peterbaron - 09-25-2020

I think one member had a loose driving sprocket's bolt behind L/side cover ??
If so, it may not sound like a bearing, as you suggested, but it may be more noisy under a real load, when ridden, not on the center stand when being span without a load....


RE: Strange wizzing noise - LoyalKhan664_imp - 09-25-2020

(09-25-2020, 07:26 AM)peterbaron_imp Wrote: I think one member had a loose driving sprocket's bolt behind L/side cover ??
If so, it may not sound like a bearing, as you suggested, but it may be more noisy under a real load, when ridden, not on the center stand when being span without a load....

I can take the cover off and check it out. Thanks!


RE: Strange wizzing noise - Cormanus - 09-25-2020

Me. It was me that had the loose bolt. Blasted thing came right out and punched a hole in the cover.
[url=https://postimg.cc/c6ZQyBpB][Image: b8c94446aa433de04e751f4ed1102524.jpg]


RE: Strange wizzing noise - peterbaron - 09-25-2020

Holy s**t. That looks bad Huh


RE: Strange wizzing noise - Lord Popgun - 09-25-2020

Nothing a little JB Weld won’t take care of Tongue

Or a new inspection window Big Grin


RE: Strange wizzing noise - Houtman_imp - 09-26-2020

(09-25-2020, 09:40 PM)Lord Popgun_imp Wrote: Nothing a little JB Weld won’t take care of Tongue

Or a new inspection window Big Grin

Or a well used piece of chewing gum might plug the hole.


RE: Strange wizzing noise - LoyalKhan664_imp - 09-26-2020

I checked today. It’s not that!


RE: Strange wizzing noise - GoldOxide_imp - 09-26-2020

(09-25-2020, 01:14 PM)Cormanus_imp Wrote: Me. It was me that had the loose bolt. Blasted thing came right out and punched a hole in the cover.
[url=https://postimg.cc/c6ZQyBpB][Image: b8c94446aa433de04e751f4ed1102524.jpg]

Is that a previous battle wound, or something new?

If new, yeah like Popgun suggested, maybe JB Weld a "metal band-aid" over the hole. Oh yeah, ... a Metallica Band-Aid.


RE: Strange wizzing noise - Lord Popgun - 09-26-2020

IIRC Cormanus had the cover replaced. Its posted somewhere on the board.