+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Oil drain plug (/showthread.php?tid=10877)
Pages:
1
2
RE: Oil drain plug - meowguy_imp - 06-22-2013
Quote:Oh, and Meowguy, this could come back to haunt you about tools needed....
I stand by what I said. I changed the equation. The new drain plug was not strong enough for that much torque and I failed to pick up on that before installation.
I further believe that if you have a Honda, you use only Honda parts on the major mechanical stuff. You wouldn't think a drain plug falls in that category but it does.
Whether the "Dimple" is alloy or not I couldn't say but the red flag should have been it's size. The head on it is only 13mm, the original is 17mm and much more massive looking.
RE: Oil drain plug - Ack-CB11_imp - 06-23-2013
Holy crap, I feel bad saying anything now. I have one in my dirtbike also, changed that one 5 times now and the CB 3 times. I've been setting the wrench for 22ft lbs.
That really stinks, I'd be pissed.
RE: Oil drain plug - Deanohh_imp - 06-24-2013
Careful of the scale on the wrench. Some are in kg-m instead of n-m.......thats about 10x too much. Or you could be using a bad wrench that's no good in the first place. Also most torque wrenches are not accurate in the lower and upper 20% of their range.
RE: Oil drain plug - ChipBeck_imp - 06-24-2013
(06-22-2013, 09:56 AM)HikerToo_imp Wrote: Geez, $35 bolt breaks off......I wonder if you just went by feel and not the torque wrench if you would be OK?
Oh, and Meowguy, this could come back to haunt you about tools needed....
-------------------------
RE: Tools you'll need
A great thread and thanks to the ferret for giving us this.
One thing I am a stickler on is the proverbial torque wrench. You really need to include two of them in your list. You will need one that goes from from 0 to 250 inch pounds and another to take you up to at least 80 foot pounds. That's a nice looking 32mm above, but what's missing?
You just cannot do the job properly without knowing you are torqued correctly.
---------------------------------
This is true in most areas of life!!
Chip