The CB1100 Community Forum

Anything you like or dislike about any forward highway pegs you've installed and where you mounted them?

What mounts did you use.

Any pic's you can post?

I can't help but feel I need that forward option to rotate a foot or both feet on occasion just for a slight position change.

I have also been pulling up some old and new posts on potential seat upgrades since sadly for me my 14 Standard seat isn't working for extended saddle time.

I appreciate your feedback on any forward peg info.

Thanks.

I just Installed some Highway Pegs on my Honda Engine Guards last night. I went on a 40 mile ride with them and I found that they work excellent!

[url=http://s1235.photobucket.com/user/a320skidooboy/media/2014%20CB1100%20DLX/IMG_0865_zpscbsskbja.jpg.html]

which pegs and where did you get them?

I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

Those look great! Have you been able to check your ground clearance on turns yet?

(08-30-2015, 02:43 AM)Hittheroad_imp Wrote: [ -> ]I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

(08-30-2015, 05:35 AM)GaryMNM_imp Wrote: [ -> ]Those look great! Have you been able to check your ground clearance on turns yet?

(08-30-2015, 02:43 AM)Hittheroad_imp Wrote: [ -> ]I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

They are 4 inches higher than the main pegs.

New member CBReno has a good set of highway pegs on his bike. See:

http://cb1100forum.com/forum/showthread....#pid104304

Cheers

(08-30-2015, 02:43 AM)Hittheroad_imp Wrote: [ -> ]I got them from a local shop nearby called Mudspringer's. Great personal service. Because of the very limited space on these guards to install pegs, they new exactly what I would need to make it work. You could get this hardware anywhere you wanted. Here's the part numbers for you.

All Kuryakyn hardware.
#1002. 1" Magnum Quick Clamp
#4511. Short Right Angle Mounts. (3.5")
#8000. ISO-Peg small/male

**
THANKS. Bought these on Amazon per your specs.