The CB1100 Community Forum

Full Version: Bungee tie down points
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5
I would like to add these tie down points. Has anybody else done this or could point me to the parts to do it? Thanks! [Image: c147355be38fd974e58d73f851d3310c.jpg]


Sent from my iPhone using Tapatalk
Use the top shock bolts off a 2017 EX, 90116-MGC-JB0. The washers are the same.
careful on torquing those top shock bolts. Several have broken them off.
(04-26-2020, 03:29 AM)pekingduck_imp Wrote: [ -> ]Use the top shock bolts off a 2017 EX, 90116-MGC-JB0. The washers are the same.


Thanks pekingduck. I ordered them off of BikeBandit.


Sent from my iPhone using Tapatalk
I have used a lot of these over the years and always bought high quality bolts for them . Be careful when strapping things down as it is easy for bungee cords to come of these "bolts"
(04-26-2020, 07:11 AM)Houtman_imp Wrote: [ -> ]I have used a lot of these over the years and always bought high quality bolts for them . Be careful when strapping things down as it is easy for bungee cords to come of these "bolts"


Good advice. I have been using Rok straps for awhile now. They seem better than the hooked variety.


Sent from my iPhone using Tapatalk
(04-26-2020, 07:14 AM)Sledge13_imp Wrote: [ -> ]
(04-26-2020, 07:11 AM)Houtman_imp Wrote: [ -> ]I have used a lot of these over the years and always bought high quality bolts for them . Be careful when strapping things down as it is easy for bungee cords to come of these "bolts"


Good advice. I have been using Rok straps for awhile now. They seem better than the hooked variety.


Sent from my iPhone using Tapatalk


Good advice. I have been using Rok straps for awhile now. They seem better than the hooked variety.
Yes , for the last 5 years I have been using the Rok straps as well , much safer and easy to use on bigger loads.
(04-26-2020, 06:19 AM)The ferret_imp Wrote: [ -> ]careful on torquing those top shock bolts. Several have broken them off.


Thanks I will err on the side of caution.


Sent from my iPhone using Tapatalk
The spec for the original bolt is 6.6 ft lbs. That isn't much.
So I finally received the bolts (more than a month for shipping) for these additional tie down points and am very happy with them. Did not over-tighten them. Thanks


Sent from my iPhone using Tapatalk
Pages: 1 2 3 4 5