04-20-2019, 10:30 AM
I live in the same area as ferret, and the weather here is miserably drizzly at the moment. And around here in the winter, we sometimes get clear, sunny days that are often cold and occasionally relatively warm...but the roads are still filthy with salt and sludge residue from recent snowy/icy weather. In summer, we get torrential rains and flash floods that wash all kinds of gravel, sand, mud, and fallen vegetation up onto the roadway. Even when the sun comes back out, the roads are a real mess.
In short, there are a lot of days that are otherwise ridable...if you don't mind your bike getting covered in salt and/or sloppy wet road dirt.
Now, I'm a guy who generally likes a clean bike. I'm not as meticulous as say, A-Man
, but for reasons of self-esteem I don't like to ride around on a dirty bike. Too, I don't think it's especially good for the bike in terms of rust and corrosion, or scratching the paint due to a film of fine grit on it. Now, I realize that for some (ahem, ferret) a dirty bike is a sign of die-hard daily rider cred and I can't argue with that really. 
Nevertheless, sometimes I would be inclined to ride but I don't want to deal with a dirty bike. Or, turn a lightly dirty bike into a complete mess. This brings me to the subject of this thread: the concept of a beater bike.
What's a "beater"? Up in the northern parts of the U.S. that see substantial snowfall and consequently live with slushy, salty roads much of the year, a lot of people have a "beater" car. It's a car that is essentially sacrificial from a cosmetic standpoint, but is otherwise roadworthy and reliable. Nobody washes a beater, and nobody cares whether or not their beater looks like crud. You just drive your beat-up beater and beat it to death.
So, brainstorming as a group, what would be some good candidates for a beater bike? We might think a little bit about the intended use: riding in inclement weather and under inhospitable road conditions of all descriptions. Therefore, I'm thinking ABS is a must (at least for me). Also preferable but not essential would be some type of low-maintenance final drive like belt or shaft. A chain would also be fine I suppose because you could just keep oiling it and not worry about cleaning the rear wheel.
There may be other riding conditions around the world where a beater bike would be handy: gravel roads, muddy roads, blistering sun that bakes plastics into dust, etc.
I think it goes without saying (but I'll say it) that a beater bike is by definition a used bike that is not costly and thus is considered more-or-less a consumable / disposable utility item. Not a problem if it has a dented tank or other road rash as long as it's safe and reliable to operate.
What do you think? What would be your ideal beater bike?
In short, there are a lot of days that are otherwise ridable...if you don't mind your bike getting covered in salt and/or sloppy wet road dirt.
Now, I'm a guy who generally likes a clean bike. I'm not as meticulous as say, A-Man

Nevertheless, sometimes I would be inclined to ride but I don't want to deal with a dirty bike. Or, turn a lightly dirty bike into a complete mess. This brings me to the subject of this thread: the concept of a beater bike.
What's a "beater"? Up in the northern parts of the U.S. that see substantial snowfall and consequently live with slushy, salty roads much of the year, a lot of people have a "beater" car. It's a car that is essentially sacrificial from a cosmetic standpoint, but is otherwise roadworthy and reliable. Nobody washes a beater, and nobody cares whether or not their beater looks like crud. You just drive your beat-up beater and beat it to death.
So, brainstorming as a group, what would be some good candidates for a beater bike? We might think a little bit about the intended use: riding in inclement weather and under inhospitable road conditions of all descriptions. Therefore, I'm thinking ABS is a must (at least for me). Also preferable but not essential would be some type of low-maintenance final drive like belt or shaft. A chain would also be fine I suppose because you could just keep oiling it and not worry about cleaning the rear wheel.
There may be other riding conditions around the world where a beater bike would be handy: gravel roads, muddy roads, blistering sun that bakes plastics into dust, etc.
I think it goes without saying (but I'll say it) that a beater bike is by definition a used bike that is not costly and thus is considered more-or-less a consumable / disposable utility item. Not a problem if it has a dented tank or other road rash as long as it's safe and reliable to operate.
What do you think? What would be your ideal beater bike?

you don't want to buy a beater you are tempted to pamper