The CB1100 Community Forum

Mine was Fabricated from 2 mounts. The upper mount is from a Suzuki or Yamaha I'm not sure which. The lowers or down tube portion is from a 78 CB750.

These are the 3 main pieces of the mount.
[url=http://s694.photobucket.com/user/husky385/media/20160224_100641_resized.jpg.html]

We used the oil cooler mounting point to fix the upper mount to the bike.
[url=http://s694.photobucket.com/user/husky385/media/IMG_0153.jpg.html]

The parts loosely on the bike.
[url=http://s694.photobucket.com/user/husky385/media/IMG_0160.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0162.jpg.html]

Cutouts to allow forks to go lock to lock.

[url=http://s694.photobucket.com/user/husky385/media/IMG_0157.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0156.jpg.html]

Clearance for the bottom of the oil cooler.

[url=http://s694.photobucket.com/user/husky385/media/IMG_0155.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0154.jpg.html]

Finished and mounted.
[url=http://s694.photobucket.com/user/husky385/media/IMG_0149.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0145.jpg.html]

I hope this helps someone who may want to install a Vetter fairing on their CB1100.

I hope carguy1959 shows his mounting system.
Kevin

Oops Thanks to Cormanus, The Ferret or Guth which ever one of you moved this thread.
Kevin

I like he way the mount allows you to keep the oil cooler in the factory spot. I modified a one piece mount and had to move the cooler to the out side of the bracket

(08-06-2016, 06:18 AM)husky385_imp Wrote: [ -> ]Mine was Fabricated from 2 mounts. The upper mount is from a Suzuki or Yamaha I'm not sure which. The lowers or down tube portion is from a 78 CB750.

These are the 3 main pieces of the mount.
[url=http://s694.photobucket.com/user/husky385/media/20160224_100641_resized.jpg.html]

We used the oil cooler mounting point to fix the upper mount to the bike.
[url=http://s694.photobucket.com/user/husky385/media/IMG_0153.jpg.html]

The parts loosely on the bike.
[url=http://s694.photobucket.com/user/husky385/media/IMG_0160.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0162.jpg.html]

Cutouts to allow forks to go lock to lock.

[url=http://s694.photobucket.com/user/husky385/media/IMG_0157.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0156.jpg.html]

Clearance for the bottom of the oil cooler.

[url=http://s694.photobucket.com/user/husky385/media/IMG_0155.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0154.jpg.html]

Finished and mounted.
[url=http://s694.photobucket.com/user/husky385/media/IMG_0149.jpg.html]
[url=http://s694.photobucket.com/user/husky385/media/IMG_0145.jpg.html]

I hope this helps someone who may want to install a Vetter fairing on their CB1100.

I hope carguy1959 shows his mounting system.
Kevin

I like, I have an old Wixom fairing i'm going to try and mount on mine this fall.

i have a windjammer SS with lowers that i am about to install - the mount it came with was a cb550 mount but no way to make it fit - after looking around i have a GS1100 mount coming that i think measure out well and should do the job - after living with it for a while - does the weight on the front end effect the bike very much?

(06-07-2017, 11:17 AM)caddy425_imp Wrote: [ -> ]i have a windjammer SS with lowers that i am about to install - the mount it came with was a cb550 mount but no way to make it fit - after looking around i have a GS1100 mount coming that i think measure out well and should do the job - after living with it for a while - does the weight on the front end effect the bike very much?

It effects the quickness of the steering a very slight amount. The bonus for me is that it reduces the jarring in the handlebars from bumps. Another bonus is that I have gained a little in mileage.
I to have some lowers for winter use.
I'll put some pics up with the windjammer lll fairing and lowers.
I like the looks without the Vetter graphics.
Kevin

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/0EFE0319-EF8B-46E8-A3D0-2120F690DA6F.jpg.html]

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/3B57446F-87C3-4B62-9538-E44BC70751D7.jpg.html]

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/31A817A7-0AA8-406B-A7AE-AB0F51BD4984.jpg.html]

(06-07-2017, 02:18 PM)husky385_imp Wrote: [ -> ]

(06-07-2017, 11:17 AM)caddy425_imp Wrote: [ -> ]i have a windjammer SS with lowers that i am about to install - the mount it came with was a cb550 mount but no way to make it fit - after looking around i have a GS1100 mount coming that i think measure out well and should do the job - after living with it for a while - does the weight on the front end effect the bike very much?

It effects the quickness of the steering a very slight amount. The bonus for me is that it reduces the jarring in the handlebars from bumps. Another bonus is that I have gained a little in mileage.
I to have some lowers for winter use.
I'll put some pics up with the windjammer lll fairing and lowers.
I like the looks without the Vetter graphics.
Kevin

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/0EFE0319-EF8B-46E8-A3D0-2120F690DA6F.jpg.html]

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/3B57446F-87C3-4B62-9538-E44BC70751D7.jpg.html]

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/31A817A7-0AA8-406B-A7AE-AB0F51BD4984.jpg.html]

It effects the quickness of the steering a very slight amount. The bonus for me is that it reduces the jarring in the handlebars from bumps. Another bonus is that I have gained a little in mileage.
I to have some lowers for winter use.
I'll put some pics up with the windjammer lll fairing and lowers.
I like the looks without the Vetter graphics.
Kevin

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/0EFE0319-EF8B-46E8-A3D0-2120F690DA6F.jpg.html]

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/3B57446F-87C3-4B62-9538-E44BC70751D7.jpg.html]

[url=http://s694.photobucket.com/user/husky385/media/Mobile%20Uploads/2017-06/31A817A7-0AA8-406B-A7AE-AB0F51BD4984.jpg.html]
Thanks - that is what i was hoping - last two bikes had full factory bodywork and I have noticed that the bar mounted full size screen moves the bars around - enough to notice - And the Vetter gives me good memories and apparently will do what i want - thanks for the help

When you get it mounted show us some pictures please.
Kevin

Wow, that is awesome! First time I have seen this....

Very nice fairing.