12-27-2021, 08:43 AM
I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.
Pages: 1 2
12-27-2021, 08:43 AM
12-27-2021, 08:55 AM
(12-27-2021, 08:43 AM)Nibis_imp Wrote: [ -> ]I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
12-27-2021, 09:33 AM
Let us know how you go searching, mvk24. I’ve relocated my rear turn signals recently enough to have a vague memory of how I did it.
12-27-2021, 09:46 AM
I found the wire harness adapters, resistors and some adapters that should work.
12-27-2021, 10:36 AM
(12-27-2021, 08:55 AM)mvk24_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:43 AM)Nibis_imp Wrote: [ -> ]I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
12-27-2021, 10:48 AM
(12-27-2021, 10:36 AM)peterbaron_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:55 AM)mvk24_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:43 AM)Nibis_imp Wrote: [ -> ]I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985 Yes thank you very much
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
(12-27-2021, 09:46 AM)Nibis_imp Wrote: [ -> ]I found the wire harness adapters, resistors and some adapters that should work.Those look cool, my turn signals are done but do you have a link for those?
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
12-27-2021, 11:07 AM
(12-27-2021, 10:48 AM)mvk24_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 10:36 AM)peterbaron_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:55 AM)mvk24_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:43 AM)Nibis_imp Wrote: [ -> ]I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985 Yes thank you very much
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
(12-27-2021, 09:46 AM)Nibis_imp Wrote: [ -> ]I found the wire harness adapters, resistors and some adapters that should work.Those look cool, my turn signals are done but do you have a link for those?
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985 Yes thank you very much
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
(12-27-2021, 09:46 AM)Nibis_imp Wrote: [ -> ]I found the wire harness adapters, resistors and some adapters that should work.Those look cool, my turn signals are done but do you have a link for those?
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca https://www.motorcycleid.com/show-chrome...=131385219
Sent from my SM-G986U1 using Tapatalk
12-28-2021, 03:12 AM
(12-27-2021, 10:36 AM)peterbaron_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:55 AM)mvk24_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:43 AM)Nibis_imp Wrote: [ -> ]I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
Yes, it does help with some good info, however, I still don't see how to take the stock signals off. While this is usually fairly simple, and it probably is. When I look at my bike, all I see is a black plate, or something, that looks like it's blocking access to the mounting hardware.
12-28-2021, 03:15 AM
(12-28-2021, 03:12 AM)Nibis_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 10:36 AM)peterbaron_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:55 AM)mvk24_imp Wrote: [ -> ]I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum(12-27-2021, 08:43 AM)Nibis_imp Wrote: [ -> ]I plan on changing to a different turn signal, anyone have any tips on how they come off. I was adding a battery tender cable to the battery today and looked at the signals, but not exactly sure how they come off.I think I did a write up when asked earlier in the year but my memory is pretty poor as of late. I will see if I can find it. I definitely posted pictures and part numbers for the harnesses and turn signals I used somewhere on here at the bare minimum
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
Yes, it does help with some good info, however, I still don't see how to take the stock signals off. While this is usually fairly simple, and it probably is. When I look at my bike, all I see is a black plate, or something, that looks like it's blocking access to the mounting hardware.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Will this help?
http://cb1100forum.com/forum/showthread....#pid304616
http://cb1100forum.com/forum/showthread....#pid300300
http://cb1100forum.com/forum/showthread....424&page=2
[url=http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985]http://cb1100forum.com/forum/showthread.php?tid=9405&pid=290985#pid290985
Yes, it does help with some good info, however, I still don't see how to take the stock signals off. While this is usually fairly simple, and it probably is. When I look at my bike, all I see is a black plate, or something, that looks like it's blocking access to the mounting hardware. The front and rear are a bit different.
The rear you have to remove the 2 bolts that are also your tie downs. That will let you remove the black peice of metal that your turn signals are mounted to.
The rear most tie down/bolt on each side goes through a plate on the back side that holds the rear turn signal housing in place.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
12-28-2021, 03:24 AM
[/quote]The front and rear are a bit different.
The rear you have to remove the 2 bolts that are also your tie downs. That will let you remove the black peice of metal that your turn signals are mounted to.
The rear most tie down/bolt on each side goes through a plate on the back side that holds the rear turn signal housing in place.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
[/quote]
Thanks, that is what I was looking for, makes sense now.
The rear you have to remove the 2 bolts that are also your tie downs. That will let you remove the black peice of metal that your turn signals are mounted to.
The rear most tie down/bolt on each side goes through a plate on the back side that holds the rear turn signal housing in place.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
[/quote]
Thanks, that is what I was looking for, makes sense now.
Pages: 1 2