The CB1100 Community Forum

So I tried to replicate it today on the stand but no success. It only does it when accelerating under load which leads me to think it might be a bearing. I’ll take it to the shop. Thanks for the advice guys!

I think one member had a loose driving sprocket's bolt behind L/side cover ??
If so, it may not sound like a bearing, as you suggested, but it may be more noisy under a real load, when ridden, not on the center stand when being span without a load....

(09-25-2020, 07:26 AM)peterbaron_imp Wrote: [ -> ]I think one member had a loose driving sprocket's bolt behind L/side cover ??
If so, it may not sound like a bearing, as you suggested, but it may be more noisy under a real load, when ridden, not on the center stand when being span without a load....

I can take the cover off and check it out. Thanks!

Me. It was me that had the loose bolt. Blasted thing came right out and punched a hole in the cover.
[url=https://postimg.cc/c6ZQyBpB]

Holy s**t. That looks bad

Nothing a little JB Weld won’t take care of

Or a new inspection window

(09-25-2020, 09:40 PM)Lord Popgun_imp Wrote: [ -> ]Nothing a little JB Weld won’t take care of

Or a new inspection window

Or a well used piece of chewing gum might plug the hole.

I checked today. It’s not that!

(09-25-2020, 01:14 PM)Cormanus_imp Wrote: [ -> ]Me. It was me that had the loose bolt. Blasted thing came right out and punched a hole in the cover.
[url=https://postimg.cc/c6ZQyBpB]

Is that a previous battle wound, or something new?

If new, yeah like Popgun suggested, maybe JB Weld a "metal band-aid" over the hole. Oh yeah, ... a Metallica Band-Aid.

IIRC Cormanus had the cover replaced. Its posted somewhere on the board.