03-24-2023, 11:38 PM
This has been covered on this forum elsewhere so I'm not looking for advice on how to do it just where I can get the other half of this connector in the UK. I'll paste and copy my FB post to save typing it out again
see here
http://cb1100forum.com/forum/showthread....=connector
Going to fit a USB charger to my bike but what a palaver. I want to use the 12v ignition circuit supply in the headlight rather than run it to the battery but Honda do not supply a live plug to their blanking auxiliary 12v supply in the headlight casing. Oh no they expect you to but a £137 kit, yes really!
Obviously i can just buy a waterproof plug for £2 odd from amazon but it means cutting the current half a plug off and fitting a new one with around an inch of cable to play with in an awkward place. I will probably have to pull the loom out of the headlight shell to fit the new plug.
In the old days I would have just cut the plug off and twisted the wires together
see here
http://cb1100forum.com/forum/showthread....=connector
Going to fit a USB charger to my bike but what a palaver. I want to use the 12v ignition circuit supply in the headlight rather than run it to the battery but Honda do not supply a live plug to their blanking auxiliary 12v supply in the headlight casing. Oh no they expect you to but a £137 kit, yes really!
Obviously i can just buy a waterproof plug for £2 odd from amazon but it means cutting the current half a plug off and fitting a new one with around an inch of cable to play with in an awkward place. I will probably have to pull the loom out of the headlight shell to fit the new plug.
In the old days I would have just cut the plug off and twisted the wires together