Good morning,
Dropped bike yesterday, need to replace clutch lever.
New one ordered
Is it simply a cases of remove holding bolt drop out old lever, replace with new and refit bolt?
Thanks
(02-02-2025, 09:07 PM)peterbaron_imp Wrote: [ -> ]Yap, but you have to transfer the brass bush # 2
https://www.hondapartshouse.com/oemparts...r-cylinder
Thanks for the heads up
(02-02-2025, 09:27 PM)Cormanus_imp Wrote: [ -> ]Are you OK, Davidjill?
Yes all good thanks.
Just got back from 50 plus mile ride, Jill my partner got off bike, I thought I had put side stand down, clearly hadn't as promptly proceeded to drop 250Kgs of bike !
Broke clutch lever, scratched mirror, Handlebar end and LHS Crank cover! Badly bruised my ego but i am sure that will repair itself !
(02-03-2025, 01:11 AM)The ferret_imp Wrote: [ -> ]that's a bummer
Yes similar to the words i used too........
I’ve done that. Glad you’re ok.
All those parts are readily available and easy to install. But the best news is that you and Jill are fine and will ride another day on your beautiful motorcycle. David
Never like to hear that someone forgot to put the side stand down, but most of us have done it at some point. In my case, twice, both times with an audience. Glad to hear that the damage was minimal and that you just need to replace a lever (and I'm assuming transfer your RLET to the new lever.)
