Is there anyone who has added a PC5 on there stock or modified bike and has a dyno map?? I'm looking for A/F ratio. If you do please post our PM me. Let me know if the map is stock or modified.
Thanks
Steve
i have the pcv w auto tune
replaced stock exhaust with motowerks gp, not cat and little baffling
the map i have had been trimmed about 9 times from the stock power commander map
i have a print screen
(04-17-2014, 01:31 AM)CIP57_imp Wrote: [ -> ]Is there anyone who has added a PC5 on there stock or modified bike and has a dyno map?? I'm looking for A/F ratio. If you do please post our PM me. Let me know if the map is stock or modified.
Thanks
Steve
Steve, I'll post mine on here when I leave work.
(04-17-2014, 03:03 AM)scott will_imp Wrote: [ -> ]i have the pcv w auto tune
replaced stock exhaust with motowerks gp, not cat and little baffling
the map i have had been trimmed about 9 times from the stock power commander map
i have a print screen
The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times?
I'm running the stock map on my PCV and have never pulled in a PC to mine.
(04-17-2014, 07:18 AM)CB4ME_imp Wrote: [ -> ] (04-17-2014, 03:03 AM)scott will_imp Wrote: [ -> ]i have the pcv w auto tune
replaced stock exhaust with motowerks gp, not cat and little baffling
the map i have had been trimmed about 9 times from the stock power commander map
i have a print screen
The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times?
I'm running the stock map on my PCV and have never pulled in a PC to mine.
The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times?
I'm running the stock map on my PCV and have never pulled in a PC to mine.
yes these values have been changed from the stock cb1100 map from power commander.
the auto tune has a variance adjustment of plus or minus 20%, you can accept the adjustment it makes after every ride and it changes the map.
this map i had had the bike out 9 times and adjusted everytime.
power commander paperwork says to lower the percent it can adjust once its dialed in and you dont see alot of variance.
i believe the target afm or mixture is 13.47, this number is close(been awhile since i looked at it so im not 100% sure) it shows on the laptop when the laptop its hooked to pcv and the bike is running.
http://cb1100forum.com/forum/showthread....spreadshee
I also have a few on hand, but our site will not allow me to attach file with a .PVM extension.
You can get the TSR map here:
http://shop.tsrjp.com/item/IS00008N00490.html
Scott, I didn't add your map for two reasons;
I anticipate the "autotune" will do just that every time you ride, so the map is perpetually changing on your bike.
I need a .pvm file to work with. Much time needed to re-type map into excel....
Did you have a new bung welded onto you header? The autotune sensor, if memory recalls, is much larger than the stocker.
Whilst this was grossly unhelpful, immature and downright inflammatory, I absolutely love it!
