Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Recommended shift points
#11
I musn't have read that bit of the owner's manual. My shift points are based on mood - just cruising' or burning off scoots (Don't take on Supersports, I don't respond well to humiliation). My basic principal, the prime command I guess, is to give the bike a good workout (thrashing) and see if it dies before I do. Smile

Cheers
Reply
#12
I'm even more glad that I can proudly admit I've never even opened the manual.

It's not some hi tech gadget that will baffle me, it's a very basic, simple motorbike. One more basic and simple than many of the many I've owned, ridden, commuted on and earned my living riding over the years.

I threw caution to the wind and decided to try riding it, filling it with fuel, checking the chain & tyres etc without consulting the manual. So far it's worked out ok.

Changing up at those points as someone else said will get you rear ended. Rules are there to be broken and this seems like a prime candidate for breaking.

Ignore this bunkum, and thrash the living daylights out of your pride and joy!Excited
Reply
#13
(04-11-2014, 05:10 PM)Flynrider_imp Wrote: I thought the recommended shift points were pretty silly when they were posted last year, but this year with the added 6th gear, they're downright ridiculous. Shifting to 6th at 37 mph? That should be somewhere in the low 2,xxx rpm range. I can't imagine lugging the engine at that rpm is good for it.

what the manual says is -- these recommended shift points is the MIN speed where you should shift up or you can harm the engine. It doesn't say these points are when you SHOULD shift
Reply
#14
(04-11-2014, 10:32 PM)cbdtran_imp Wrote:
(04-11-2014, 05:10 PM)Flynrider_imp Wrote: I thought the recommended shift points were pretty silly when they were posted last year, but this year with the added 6th gear, they're downright ridiculous. Shifting to 6th at 37 mph? That should be somewhere in the low 2,xxx rpm range. I can't imagine lugging the engine at that rpm is good for it.

what the manual says is -- these recommended shift points is the MIN speed where you should shift up or you can harm the engine. It doesn't say these points are when you SHOULD shift

Not sure where you READ that? Here's the page

[url=http://smg.photobucket.com/user/theferret111/media/imagejpg1_zps3bdc1d58.jpg.html][Image: 2051cbb78da70ec042a22a1bf048f10c.jpg]

It clearly says " recommended shift points". Not that it matters because no one is going to shift at those points regardless.

Today I paid attention to where I normally shift when riding

1st to 2nd at 20 mph, to 3 rd at 35 to 4 th at 45 and to 5 th at 55
coincidentally this falls nicely into the speed zones we have..
Reply
#15
(04-12-2014, 07:27 AM)The ferret_imp Wrote:
(04-11-2014, 10:32 PM)cbdtran_imp Wrote:
(04-11-2014, 05:10 PM)Flynrider_imp Wrote: I thought the recommended shift points were pretty silly when they were posted last year, but this year with the added 6th gear, they're downright ridiculous. Shifting to 6th at 37 mph? That should be somewhere in the low 2,xxx rpm range. I can't imagine lugging the engine at that rpm is good for it.

what the manual says is -- these recommended shift points is the MIN speed where you should shift up or you can harm the engine. It doesn't say these points are when you SHOULD shift

Not sure where you READ that? Here's the page

[url=http://smg.photobucket.com/user/theferret111/media/imagejpg1_zps3bdc1d58.jpg.html][Image: 2051cbb78da70ec042a22a1bf048f10c.jpg]

It clearly says " recommended shift points". Not that it matters because no one is going to shift at those points regardless.

Today I paid attention to where I normally shift when riding

1st to 2nd at 20 mph, to 3 rd at 35 to 4 th at 45 and to 5 th at 55
coincidentally this falls nicely into the speed zones we have..

Not sure where you READ that? Here's the page

[url=http://smg.photobucket.com/user/theferret111/media/imagejpg1_zps3bdc1d58.jpg.html][Image: 25c1597a9deb056464afdee747991fb6.jpg]

It clearly says " recommended shift points". Not that it matters because no one is going to shift at those points regardless.

Today I paid attention to where I normally shift when riding

1st to 2nd at 20 mph, to 3 rd at 35 to 4 th at 45 and to 5 th at 55
coincidentally this falls nicely into the speed zones we have..
Eh? What about 6th? Don't tell me you ain't using your new 6th ferret? Confused
Reply
#16
I'm damned if I can find this instruction in the 2011 Australian model's manual.
Reply
#17
(04-12-2014, 07:42 AM)Cormanus_imp Wrote: I'm damned if I can find this instruction in the 2011 Australian model's manual.

Have you tried turning it upside down? ROFL

Sorry, I'll get me coat...Blush
Reply
#18
Tortuga..today on the roads I rode, I did not use 6th but assume I would shift to 6th at 65 or so.
Never got over 60 today.
Reply
#19
I've been following this for a while - in any event, isn't shift point better determined by engine speed, rather than vehicle speed?
Reply
#20
I use my tach, 1 to 2 3500rpm, 2to3 3250rpm, 3t04 3000rpm, 4to5 2750rpm, my last tank I got 62 mpg city&highway.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  gear shift problem 2017 model ? alprider 12 1,394 03-26-2018, 05:04 PM
Last Post: alprider
  HIGHLY recommended! VLJ_imp 41 2,176 02-03-2018, 12:38 PM
Last Post: DaSwami_imp
  Shift without clutch.... much? mattmcuomo@yahoo.com 33 1,799 03-10-2017, 01:21 PM
Last Post: EarsOnWheels_imp
  Shift peg. Ghis_imp 2 252 07-26-2015, 08:43 AM
Last Post: Lord Popgun
  12 USA rides recommended HikerToo_imp 1 262 09-14-2014, 09:13 AM
Last Post: emptysea

Forum Jump:


Users browsing this thread: 1 Guest(s)