2013 CB1100s with ABS

[Cormanus]

I had a PM from a brother the other day asking me whether there was an easy way to identify how many of the 2013 bikes on the Forum's Register had ABS. I fear there isn't any way I can think of.

Except: could anyone with a 2013 ABS bike on the Register that is not already identified as such please respond to this thread? I'll then update the register.

[kennyw]

Mine is an abs but I don't remember if it is in the register that way.

[Randy B]

We had doubles popping up when we first started out and it was due to the std and abs models. I can't remember how it was resolved.

[Cormanus]

We had doubles popping up when we first started out and it was due to the std and abs models. I can't remember how it was resolved.

I've sorted it by identifying known ABS bikes at the top of the Register.

Mine is an abs but I don't remember if it is in the register that way.

Thanks Kenny. I've moved you into the ABS section.

[johnnyj_imp]

I have noticed my bike has the letter designation "D" after the model
2013 CB1100D it is that way on my paperwork from dealer.
I notice on the service manuals I have seen for the bike it reads 2013CB1100A.
Is that the difference in letter designation that the "A" has ABS brakes and the "D" does not? My bike does not have ABS brakes.

[CA200_imp]

Hay thanks for giving the ABS thing a try.

[Lord Popgun]

I have noticed my bike has the letter designation "D" after the model
2013 CB1100D it is that way on my paperwork from dealer.
I notice on the service manuals I have seen for the bike it reads 2013CB1100A.
Is that the difference in letter designation that the "A" has ABS brakes and the "D" does not? My bike does not have ABS brakes.

Check this thread: http://cb1100forum.com/forum/showthread....ght=models

Scroll down to Cormanus' post, #9

Might help
Also Johnny, My CB date is 1/13, model CB1100 (ser 0243) and is NON ABS
In the '13 service manual, the non-abs stuff is CB1100 and the ABS stuff is CB1100A

I'm in the United States.

[Cormanus]

Thanks popgun, I knew I'd done some research on that. Hadn't had a chance to find it.

[gossman_imp]

We had doubles popping up when we first started out and it was due to the std and abs models. I can't remember how it was resolved.

Mine brought in some confusion, there is a difference in the entire serial number that designates an ABS model from the non-ABS model, its in the middle of the series not in the last 4 numbers.

[johnnyj_imp]

Thanks a bunch popgun I appreciate it!