Posts: 64
Threads: 28
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2015
My new CB has been everything I could hope for. Perfect in every way except one...and it's fairly minor. I wish it was a bit louder. My former bike was a Harley Iron...I enjoyed the bike but it was inferior to this one in almost every way. The one thing I do miss is the sound. It was nice to hear that assertive growl break the silence before your ride. Anyone have a suggestion for getting the stock pipe to be a tad louder? Also, if you believe the only solution is a different pipe, please feel free to suggest one. Thanks gang!
Posts: 23,403
Threads: 697
Likes Received: 482 in 220 posts
Likes Given: 596
Joined: Apr 2025
Some have drilled their stock exhausts with various levels of success. Most go with an aftermarket exhaust. Seems top choices are in order Staintune, arrow and yoshimura.
Posts: 281
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2015
https://youtu.be/Q2BOZzH9gXc
This should be a sound clip of my modified factory exhaust.
Here is a picture
Posts: 46
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2016
(02-08-2016, 12:46 PM)Carguy1959_imp Wrote: https://youtu.be/Q2BOZzH9gXc
This should be a sound clip of my modified factory exhaust.
Here is a picture
Do you have a write up on what exactly you did here?
Posts: 313
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2013
(02-08-2016, 12:46 PM)Carguy1959_imp Wrote: https://youtu.be/Q2BOZzH9gXc
This should be a sound clip of my modified factory exhaust.
Here is a picture
Sounds just like mine! Didn't cost three to five hundred dollars, either.
(02-08-2016, 02:11 PM)Matt F._imp Wrote: (02-08-2016, 12:46 PM)Carguy1959_imp Wrote: https://youtu.be/Q2BOZzH9gXc
This should be a sound clip of my modified factory exhaust.
Here is a picture
Do you have a write up on what exactly you did here?
Do you have a write up on what exactly you did here?
Here ya go:
http://cb1100forum.com/forum/showthread.php?tid=2829
Posts: 159
Threads: 3
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2015
Just goes to show everyone is different. I really like the quiet exhaust and tell people it sounds like 4 hummingbirds ...
Posts: 1,031
Threads: 44
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2013
I've sung their praises here before, and I'll say it again: Staintune's system is perfect. Great, low, full sound, but not too loud (I'm 58 and am over loud exhausts - they're just too tiring after a while), and the quality is second to none. Couldn't recommend them enough.
Posts: 147
Threads: 17
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2015
I went a different route that most do here. I added a Two Brothers M2 slip on. There are those that would argue that it doesn't fit the retro feel of the bike. I like that it adds a modern twist to a retro machine and the exhaust note is great. I'm still using the stock header though, and the catalytic converter is definitely a source of sound attenuation. At some point I'll either open up that cat, remove the guts and weld it back, or simply go with a cat free titanium header.
Posts: 370
Threads: 23
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
(02-08-2016, 12:16 PM)The ferret_imp Wrote: Some have drilled their stock exhausts with various levels of success. Most go with an aftermarket exhaust. Seems top choices are in order Staintune, arrow and yoshimura.
Or this one..............
http://www.samurider.com/?p=18295/#itemImage
(I was pleasantly surprised to the pics of the installed Nojima 4-into-1 exhaust are actually of MY bike!
Love you Takashi!!!!!!!!
Btw, this exhaust is THE best $1600 I have ever spent.
Well the installed pics of the Nojima exhaust on the US-spec, red & silver bike are of my bike.
I'm just completely flattered!
Takashi & Samurider ROCKS!
Posts: 8,026
Threads: 21
Likes Received: 180 in 103 posts
Likes Given: 121
Joined: Apr 2025
Inline, Nice picture! What does New Technology, Spiral connector mean in the ad?
