Anyone in Georgia want a 2013 ABS

[postoak_imp]

There's a nice one for sale on Cycletrader. Less than 1000 miles and with some extras:

http://www.cycletrader.com/listing/2013-...-118848174

[LongRanger_imp]

Looks like a nice bike, but it comes with the guy's pants? Who knows what he did in those pants. No thanks!

[Cormanus]

You don't have to put them on, LR.

[postoak_imp]

I'll bet its one of us old-timers finally "hanging up his spurs".

[Lord Popgun]

LR, two words--washing machine.

[Beemer Guy_imp]

I had one dealer tell me that his bike for sale had rear ABS, which we all know isn't true and he admitted that some people don't call it "real ABS". How can I tell, such as on a bike like this with lousy photos, that it really has ABS? Should I ask for a pic of the instrument panel with the ignition on but the engine not running, so that the light is on?

[postoak_imp]

Ask the salesman for a photo of the rear of the front fender. There should be a hose running from one side of the wheel to the other.

There's also a pulser ring attached to the inside of one of the brake disks, but I'm not sure whether it would be visible in a photo.

Okay, go here and look at the 3rd photo down. You can see the smaller pulser ring.

http://ridermagazine.com/2015/04/03/2014...erm-rides/

[kmoney_imp]

Look for the ring on the front wheel. Alternatively ask for a photo of the dash key-on-engine-off. The dash lights up the ABS light for a certain time or until you go over a certain speed when you first turn it on.

[Beemer Guy_imp]

Thanks postoak and kmoney!

[flynrider]

On the 2013 models, the 8th digit of the VIN will also tell the tale. If it's a "1" that's non-ABS. If it's a "5", it's an ABS model.