Posts: 517
Threads: 32
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2016
(07-29-2016, 09:41 AM)Lord Popgun_imp Wrote: Roper, if you get another shield and you get buzzing again, remove your headlight and wrap ALL the connectors in the shell with some thin foam. Like from packing material or something.
A number of us had this happen and it turned out the connectors were buzzing against the headlight bucket or bulb holder. Couldn't hear it until we installed a windshield or flyscreen. Drove us crazy till we figured it out!
Thanks, Popgun! I think I'll ride without a windshield, for now. When I put one on for the colder weather, I'll definitely remember your advice!
Posts: 288
Threads: 20
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2015
I bought this one. I love the look of it. Might be smaller than what you are looking for. It provides just enough wind protection to make highway speeds tolerable but you still get the experience of riding a naked bike.
http://www.samurider.com/?p=13212/#itemImage
Posts: 281
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2015
If you are machanialy inclinded, you can go this route. It cost me about $500 and 8hrs. If anybody is interested, I can share what it took to do.
Posts: 402
Threads: 59
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2015
I've settled in a a National Cycle Plexistar 2 for cool weather and Street Shield EX in warmer weather. Same hardware, minimal adjustments one to another. I get a fair amount of air with the Street Shield EX and very little with the PS2.
Posts: 1,180
Threads: 34
Likes Received: 35 in 10 posts
Likes Given: 15
Joined: Apr 2025
(08-01-2016, 12:39 PM)Carguy1959_imp Wrote: If you are machanialy inclinded, you can go this route. It cost me about $500 and 8hrs. If anybody is interested, I can share what it took to do.
I didn't take to this look at first but it is really starting to grow on me. Your larger back rest does a nice job of counterbalancing the bulk of the fairing. There are a lot of these fairings listed on ebay, some are even new old stock.
If you have the time and inclination to write it up for the how-to section, I'd enjoy seeing the install process.
Posts: 58
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2016
Just ordered a National Cycle, Street Shield(u-clamp mount),the difference between the u-clamp mount and the regular street shield,as far as i can determine is, current stock of the regular street shield seems to be acrylic and the u-clamp is the newer model in stock made from polycarbonate.Price was right also,113.95 with free shipping.Weborder late Sunday evening,tracking says delivered by end of day wednesday.Not bad.Acrylic on most models is about 4.5 mm thick and polycarbonate on this one is 3 mm thickness.
Posts: 673
Threads: 26
Likes Received: 5 in 5 posts
Likes Given: 62
Joined: May 2025
(08-01-2016, 12:39 PM)Carguy1959_imp Wrote: If you are machanialy inclinded, you can go this route. It cost me about $500 and 8hrs. If anybody is interested, I can share what it took to do.
This is my favorite standard...
you should have bought a DELUXE
2014 Honda CB1100 DLX
2002 Honda CB750 Nighthawk
Posts: 906
Threads: 47
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2013
personally, nothing beats the chic design road comet (I) screen for looks...
with the touring screen wind protection is even very good, although loud at speed
Posts: 454
Threads: 17
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2014
(08-02-2016, 04:59 AM)Riko_imp Wrote: personally, nothing beats the chic design road comet (I) screen for looks...
with the touring screen wind protection is even very good, although loud at speed
It does look good Riko...brings back memories of the Shoei mini fairings available several decades ago.
Posts: 116
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
^^^
Yes, very retro - the Shoei FM2 that I had on my CB750 Nighthawk. It was just 5-6 years ago that I found it on eBay as NOS for about $150 (fiberglass too)
