2013 Swingarm pivot width

[graystreet_imp]

Hey guys, I'm looking to swap my '79 cb750 swingarm for a 2013 cb1100 to accomodate a wider rear tire. Can anyone here with a 2013 measure their swingarm width for me?

The part that connects the frame from side to side, not the length of the swingarm.

Thanks in advance!

[the Ferret]

I went out and looked at mine to try and get a measurement for you, but it looks like it would be very diificult to get any kind of Accurate measurement without the bike being apart, and having the swingarm in hand. I could barely see up in there.

[lola_imp]

Hey guys, I'm looking to swap my '79 cb750 swingarm for a 2013 cb1100 to accomodate a wider rear tire. Can anyone here with a 2013 measure their swingarm width for me?

The part that connects the frame from side to side, not the length of the swingarm.

Thanks in advance!

11 inches dead on with the OEM HONDA spacers

10 1/4 without the OEM Spacers

[graystreet_imp]

Thanks lola.. That's a bit wider than my 750, maybe I can do some machining down and make it work

[lola_imp]

Thanks lola.. That's a bit wider than my 750, maybe I can do some machining down and make it work

No problem . It shouldn't be that hard machining and if you go over you could just play with spacer thickness.

goodluck