CB 1100 at the Track?

[johnf514_imp]

Hi Morewood, I should have been more specific. I was only talking about the peg feelers. I did not touch down center stand, exhaust, or SW Motech frame sliders. I did scrape the sidestand when I touched the left side peg feeler, but that was a fleeting scrape.

[morewood_imp]

Thanks Django... The pics and your narrative speak volumes about clearance and suspension. I'll have to ride conservatively if I bring the CB to the track instead of the VFR. I am (like you were) curious about how the CB will perform. Maybe a slow couple of days at the track will be good for me. Maybe I'll bring BOTH bikes.
Good to know. Thanks.

[R748_imp]

Can't be much worse than a Z750 with stock suspension settings. Talk about scary!

Keep it smooth and don't over brake/accelerate and sticky side should remain down most of the time

[Rolls_imp]

Peg feelers on our bikes very, very conservative. And if they do scrape, the pegs fold. Many have shortened or even removed them. I also crank the springs up to high preload for the relatively smooth and predictable surface at most tracks. Also, hang off to reduce lean - a little goes a long way.

Hope it helps.