CB 1100 at the Track?

[morewood_imp]

Has anyone done a track day with their CB1100? I've been to many (20+) CLASS schools, but usually on my VFR. I'm considering bringing the CB this year instead. Thoughts???

[stateboy_imp]

One of the forum members (I think Stichill) spoke of a free or discounted track day on the west coast (CA). I thought it was sometime this month. I'm in the Midwest so it wouldn't work for me. I'd go just to learn something, lower the bar and make everyone else feel good about themselves.

[LongRanger_imp]

Ulvetanna perhaps?

[emptysea]

Rolls tracked his bike and there are at least two other members who have. Here's one thread about Rolls' experience: http://cb1100forum.com/forum/showthread....ight=track

[JF Coastal_imp]

I did a track Day on my CB1100. It was pretty amazing, my brother in law is huge into N2 Track organizers. They were in the Savannah area, and they completely hooked me up. Very professional and friendly group of guys. Stuck me in novice group. Let me borrow leathers / boots. Prepped my bike for me... Tape, etc.. Had classes at track, and walked me through everything. Check them out if they are ever in your area.

Very Fun but slightly intimidating. I may do it again one day, but it won't become a weekly hobby for me. Let me see if I can find an old photo.. hmmm. .

Dam.. Photos.. Oh well... It was a fun day.

[morewood_imp]

Thanks stateboy, LongRanger, Empty Sea, and JF Coastal. Good info.
The only thing that concerns me about the CB at the track is relatively soft suspension and ground clearance. Lean angles at the track get pretty dramatic as the day goes on.

[johnf514_imp]

Hi morewood, I took my CB to Jennings last year. No issues with soft suspension or ground clearance. You won't break any records and the bike certainly wants to push wide in the corners, but nothing you can't have a little fun with. Check out my post:

http://cb1100forum.com/forum/showthread.php?tid=9824

[Cormanus]

Django, too, may well have done a couple of track days on his CB1100.

[morewood_imp]

Thanks for the link John, good stuff.
To quote your linked post, "had the hard parts down earlier than I thought possible." That's what I'm talking about when I reference clearance and suspension.

[Django]

http://cb1100forum.com/forum/showthread.php?tid=6639