The CB1100 Community Forum › Honda CB1100 Discussions › General Discussion v
Thought I was done with the CB - trying again (forks)

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Thought I was done with the CB - trying again (forks)
PowerDubs_imp Offline
Road Warrior
Posts: 2,635
Threads: 125
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jun 2016
#51
09-02-2018, 02:58 AM
I am happy that so many others are enjoying the '17 fork upgrade!!
Find
Reply
Guth_imp Offline
Road Warrior
Posts: 2,542
Threads: 125
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
#52
09-02-2018, 05:00 AM
(08-27-2018, 04:58 AM)DBM_imp Wrote: Does anyone have a picture or illistration showing the 2014 damper rods? Im thinking about drilling the compression holes slightly bigger, and running 15 wt. fork oil with the spring preload full stiff. This should free up the compression to help with the harshness on bumps and slow down the rebound to control the stiff spring setting. Which holes are the compression control and which holes are the rebound control?

If you're even contemplating taking your forks apart you should just go ahead and install the cartridge emulators and new springs and enjoy the full adjustability that they bring. This would be your best bang for the buck.
Find
Reply
DBM_imp Offline
Been There
Posts: 279
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2018
#53
09-04-2018, 03:45 PM
(09-02-2018, 05:00 AM)Guth_imp Wrote:
(08-27-2018, 04:58 AM)DBM_imp Wrote: Does anyone have a picture or illistration showing the 2014 damper rods? Im thinking about drilling the compression holes slightly bigger, and running 15 wt. fork oil with the spring preload full stiff. This should free up the compression to help with the harshness on bumps and slow down the rebound to control the stiff spring setting. Which holes are the compression control and which holes are the rebound control?

If you're even contemplating taking your forks apart you should just go ahead and install the cartridge emulators and new springs and enjoy the full adjustability that they bring. This would be your best bang for the buck.

If you're even contemplating taking your forks apart you should just go ahead and install the cartridge emulators and new springs and enjoy the full adjustability that they bring. This would be your best bang for the buck. Thank you for the advice. Im on a tight budget right now, so lm looking for a simple solution. Can anyone identify the stock damper rod configuration?
Find
Reply
dave Offline
Road Warrior
Posts: 994
Threads: 61
Likes Received: 43 in 16 posts
Likes Given: 8
Joined: Dec 2013
#54
09-05-2018, 10:54 AM
(06-25-2018, 12:13 PM)Banned_imp Wrote: There has been at least 3 of us now that have put the 2017 forks on our CBs, well worth the money. Combined with the Ikon shocks my 2014 has been completely transformed.
Make that at least four.
Find
Reply
peterbaron Offline
Road Warrior
Posts: 6,967
Threads: 93
Likes Received: 418 in 235 posts
Likes Given: 830
Joined: Apr 2025
#55
09-05-2018, 09:11 PM
So, just to clarify, NO mistake please, 2017 forks will perfectly fit 2014 without any further/additional mods, just a simple swap, correct ??.
Thanks.
Find
Reply
Banned_imp Offline
Been There
Posts: 548
Threads: 18
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2017
#56
09-05-2018, 10:05 PM
(09-05-2018, 09:11 PM)peterbaron_imp Wrote: So, just to clarify, NO mistake please, 2017 forks will perfectly fit 2014 without any further/additional mods, just a simple swap, correct ??.
Thanks.

That is correct. If you are able to do it all at once (ie no physical limitations requiring breaks) it will probably take about 30 minutes to change them.
Find
Reply
peterbaron Offline
Road Warrior
Posts: 6,967
Threads: 93
Likes Received: 418 in 235 posts
Likes Given: 830
Joined: Apr 2025
#57
09-05-2018, 10:42 PM
(09-05-2018, 10:05 PM)Banned_imp Wrote:
(09-05-2018, 09:11 PM)peterbaron_imp Wrote: So, just to clarify, NO mistake please, 2017 forks will perfectly fit 2014 without any further/additional mods, just a simple swap, correct ??.
Thanks.

That is correct. If you are able to do it all at once (ie no physical limitations requiring breaks) it will probably take about 30 minutes to change them.

That is correct. If you are able to do it all at once (ie no physical limitations requiring breaks) it will probably take about 30 minutes to change them. Thumbs Up
Find
Reply
Houtman_imp Offline
Road Warrior
Posts: 3,881
Threads: 115
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
#58
09-06-2018, 04:30 AM
Yes Peterbaron , it is a very easy swap , especially if you have a front stand , I used a Pitbull one.
Find
Reply
peterbaron Offline
Road Warrior
Posts: 6,967
Threads: 93
Likes Received: 418 in 235 posts
Likes Given: 830
Joined: Apr 2025
#59
09-06-2018, 04:33 AM
(09-06-2018, 04:30 AM)Houtman_imp Wrote: Yes Peterbaron , it is a very easy swap , especially if you have a front stand , I used a Pitbull one.

Thumbs Up
Find
Reply
PowerDubs_imp Offline
Road Warrior
Posts: 2,635
Threads: 125
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jun 2016
#60
09-06-2018, 04:41 AM
I just put the bike on the center stand and weight on the seat.


Sent from my iPhone using Tapatalk
Find
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Thought this was a deal until... Gone in 60 22 477 03-16-2026, 02:06 PM
Last Post: Lord Popgun
  About to order the '17 dual bending valve forks for my '14 PowerDubs_imp 60 2,652 09-21-2021, 07:22 AM
Last Post: pekingduck
   CB1100 not so unremarkable as I thought Streetshark07_imp 50 2,898 11-02-2020, 03:47 AM
Last Post: Charlie Bravo_imp
  17 EX for $17,000.00 I thought the forum could use an evening laugh clearviewx 22 1,003 08-21-2019, 01:15 PM
Last Post: Cormanus
  still going to play with the front forks ohiorider_imp 5 394 08-13-2019, 09:31 AM
Last Post: peterbaron
  Thought I had my first problem Swartzracer_imp 13 648 07-25-2018, 09:20 AM
Last Post: peterbaron
  Hudson NY - Million to one shot...But thought I'd ask glenridgerich_imp 7 387 03-29-2016, 10:39 PM
Last Post: glenridgerich_imp
  your thought for the day the Ferret 5 266 01-03-2014, 12:58 AM
Last Post: rboe

Forum Jump:


Users browsing this thread: 1 Guest(s)