oem parts accessories

[1973cb750]

thats good to know i was looking at the newer superceded kit thats suppose to fit so maybe that issue was worked out idk but thats a interesting link to keep in mind i would have had no idea that would exist thanks magna

---

i had these cheap lights laying around and need to find a good switch and relay to run them. their not permanently mounted yet just test fitting. i also want to add a dyno jet map switch for a leaner highway cruise map for high elevation and fuel saving if i need to. i dont really use the dynojet but i can see that benifit on the fly fuel map changes. im curious to see how my tune does on a long trip it now has some parts of the guhl tune but ive modified it quite a bit for a new muffler i tig welded for it last summer 

[Tev62]

another question I was had im planning a trip from oklahoma to utah, who knows where in between. how do you guys like the honda heated grips?? I tried a cheap set once upon a time and burn up a rectifier on another bike. how is the honda oem kit  pretty safe works well ?

The Honda heated grips, at least here, are very expensive. I have Oxford grips on mine and you have a lot of fine control over the heat and can have them pretty toasty.

[1973cb750]

another question I was had im planning a trip from oklahoma to utah, who knows where in between. how do you guys like the honda heated grips?? I tried a cheap set once upon a time and burn up a rectifier on another bike. how is the honda oem kit  pretty safe works well ?

The Honda heated grips, at least here, are very expensive. I have Oxford grips on mine and you have a lot of fine control over the heat and can have them pretty toasty.

dealers here have them for 65$ and 80 for the install kit
08T50-MGE-8M001    64$ plush shipping 
08T70-MGC-D30        79$

[peterbaron]

I had Honda heated grips on my DLX and the previous standard model, 3 heat settings, and I have no complaints.
On my recently purchased 2024 Z650RS, I installed the KOSO Apollo with 5 heat settings. They're also excellent and at least twice as cheap as the original Honda grips.
Both heated grips have an integrated thumb controller,

For my Kawi:
https://cb1100forum.net/forum/showthread...#pid271447

[Tev62]

another question I was had im planning a trip from oklahoma to utah, who knows where in between. how do you guys like the honda heated grips?? I tried a cheap set once upon a time and burn up a rectifier on another bike. how is the honda oem kit  pretty safe works well ?

The Honda heated grips, at least here, are very expensive. I have Oxford grips on mine and you have a lot of fine control over the heat and can have them pretty toasty.

dealers here have them for 65$ and 80 for the install kit
08T50-MGE-8M001    64$ plush shipping 
08T70-MGC-D30        79$

That is a superb price! Unfortunately the design changed for the 2017 models and they are currently very expensive. 08T70-MGE-D10 at around $436

[1973cb750]

another question I was had im planning a trip from oklahoma to utah, who knows where in between. how do you guys like the honda heated grips?? I tried a cheap set once upon a time and burn up a rectifier on another bike. how is the honda oem kit  pretty safe works well ?

The Honda heated grips, at least here, are very expensive. I have Oxford grips on mine and you have a lot of fine control over the heat and can have them pretty toasty.

dealers here have them for 65$ and 80 for the install kit
08T50-MGE-8M001    64$ plush shipping 
08T70-MGC-D30        79$

That is a superb price!  Unfortunately the design changed for the 2017 models and they are currently very expensive. 08T70-MGE-D10 at around $436

buy the older set all thats diff is the accessorie plug easy fix

[1973cb750]

turns out the grips I ordred are just one side and the other side is impossible to get but i found a set of 08T71-MGS-A31 that fit these

FITMENT: Honda , CB500X , 2014 ||| Honda , CB500X , 2015 ||| Honda , CB500X , 2016 ||| Honda , CB500X , 2017 ||| Honda , CB500X , 2018 ||| Honda , CB500X ABS , 2014 ||| Honda , CB500X ABS , 2015 ||| Honda , CB500X ABS , 2016 ||| Honda , CB500X ABS , 2017 ||| Honda , CB500X ABS , 2018 ||| Honda , CBR650F , 2014 ||| Honda , CBR650F , 2015 ||| Honda , CBR650F , 2016 ||| Honda , CBR650F , 2018 ||| Honda , CBR650F ABS , 2014 ||| Honda , CBR650F ABS , 2015 ||| Honda , CBR650F ABS , 2016 ||| Honda , CBR650F ABS , 2018 ||| Honda , CTX700 , 2014 ||| Honda , CTX700 , 2015 ||| Honda , CTX700 , 2016 ||| Honda , CTX700 DCT ABS , 2014 ||| Honda , CTX700 DCT ABS , 2015 ||| Honda , CTX700 DCT ABS , 2016 ||| Honda , CTX700 DCT ABS , 2017 ||| Honda , CTX700N , 2014 ||| Honda , CTX700N , 2015 ||| Honda , CTX700N , 2016 ||| Honda , CTX700N DCT ABS , 2014 ||| Honda , CTX700N DCT ABS , 2015 ||| Honda , CTX700N DCT ABS , 2016 ||| Honda , NC700X , 2014 ||| Honda , NC700X , 2015



any one have one of these bikes and can compared the throttle tube and length of them i think it will work fine

[Gone in 60]

1973, can you show how you have those lights mounted? Thanks!

[1973cb750]

https://imgur.com/gallery/Mnks7F3#lFKXBH  This was a video i had on my phone not sure what i said here as im on a phone call but i used the pich bolts basically 

1973, can you show how you have those lights mounted? Thanks!

[Gone in 60]

Thanks 1973. Off of the pinch bolts. I was thinking of that location for mounting mine, wondering how it would work. I ended up mounting to the fender screws but thanks for confirming that the pinch bolts are a viable option!

I have those same cheap lights on my Triumph and they’ve been going strong for many years.