What is the most annoying thing that happens to you on the bike?

[GoldOxide_imp]

I think "dolly" should get a new name.

[peterbaron]

Like what???

[peterbaron]

I actually have some solid vinyl flooring material the Navy (and no doubt others) uses and mounts/moves some heavy duty equipment on. I have it in my garage and it will hold up. Or has so far. Does show dents if the bike is on the center stand too long.

BUT, post a pic after your mod. I might want to do it.

Here is an update.
I used Rubbermaid shelf bracket to modify my dolly, investment, about C$7.00

UPDATE
LP, just to let you know that the nuts thickness must not exceed 3 mm, otherwise it might drag against the garage floor under the CB's weight...and I have a very smooth/epoxy floor.
.....or instead of nuts, you may cut the tread in dolly's base and use bolts only.

[GoldOxide_imp]

I actually have some solid vinyl flooring material the Navy (and no doubt others) uses and mounts/moves some heavy duty equipment on. I have it in my garage and it will hold up. Or has so far. Does show dents if the bike is on the center stand too long.

BUT, post a pic after your mod. I might want to do it.

Here is an update.
I used Rubbermaid shelf bracket to modify my dolly, investment, about C$7.00

UPDATE
LP, just to let you know that the nuts thickness must not exceed 3 mm, otherwise it might drag against the garage floor under the CB's weight...and I have a very smooth/epoxy floor.
.....or instead of nuts, you may cut the tread in dolly's base and use bolts only.

UPDATE
LP, just to let you know that the nuts thickness must not exceed 3 mm, otherwise it might drag against the garage floor under the CB's weight...and I have a very smooth/epoxy floor.
.....or instead of nuts, you may cut the tread in dolly's base and use bolts only.
... or use large gauge pop rivets, heads pointing down.

[Houtman_imp]

Like what???

You could call it "smarty " after its owner......

[mikeymike88_imp]

Two things that drive me nuts:
1) forgetting to buckle my helmet before I put my gloves on. My bare fingers are fat enough, impossible with gloves. And
2) parking, pulling key and tossing it in my pocket, only to realize I need it for the helmet lock

[Gone in 60]

The reason I stopped listening to regular radio in my earbuds, and went strictly to Spotify or Pandora... enjoying a nice ride, when a 800 Kars 4 Kids commercial comes on.

[GoldOxide_imp]

The reason I stopped listening to regular radio in my earbuds, and went strictly to Spotify or Pandora... enjoying a nice ride, when a 800 Kars 4 Kids commercial comes on.

lol - Do people still listen/watch commercials these days?

But yeah, would be annoying while one with the machine.

[Gone in 60]

I only watch enough of the commercial to wait for the SKIP to appear. I arranged my earbuds to have the pause button within reach just below my helmet, so if I slapped the right spot on my neck while riding, I could mute the Kars 4 Kids commercials as soon as I heard the first downbeat of the music. But, I decided that simple, uninterrupted background music was much less distracting.

[GoldOxide_imp]

I only watch enough of the commercial to wait for the SKIP to appear. I arranged my earbuds to have the pause button within reach just below my helmet, so if I slapped the right spot on my neck while riding, I could mute the Kars 4 Kids commercials as soon as I heard the first downbeat of the music. But, I decided that simple, uninterrupted background music was much less distracting.

... that kid (Kars 4) must be reaping in the royalties these days. The commercial has been around awhile. They even updated it with new kid voices, but have since disappeared and the original voice is back.