HOW OEM IS YOUR CB ?

[GoldOxide_imp]

4 X OEM

Heck, I'd ride the lawnmower if nothing else was around.



That is an incredibly sweet, sweet, image of a bike.

[teamvisegrip_imp]

I have lots of plans for my 2014 Honda CB1100. I have already installed a full Yoshimura exhaust and Dart Fly Screen.

I have purchased the TSR intake parts for the Air Cleaner and Throttle Bodies to be installed this fall. I will need to do the Air mod to stop engine backfires as you throttle down. So many ways to accomplish this modification. Need to do the Reflash the CPU too. The bike is not broken in yet so I need to wait on this.

Then onto the looks. Honda Carbon Fiber Tank protector. Next to be purchased are the Carbon Fiber Air Filter Cover and Chain Guard. The the Yoshimura Oil Cooler Shield. But to get all these parts I need to sell off some bikes and parts. LOL!

I will round out the bike with getting the full Honda Tool Kit for it. After all these mods I will be done with it. I have to say I love the bike. Just done so right!

OH heck! Yes I installed the most important item... the RLET too!

[redbirds_imp]

On my 2013,
Side covers painted to match tank
Sw Motech crash bars
2014 engine sprocket cover
Michelin PR3 tires
Puig screen

NO RLETS!

Sparky's 2013
SW Motech crash bars
Highway pegs
SW Motech handlebar risers
Sargent custom seat
Michelin PR3 tires
Windstream screen

NO RLETS!

[Bheezy27403_imp]

What's the difference between the 13 and 14 sprocket cover?

the 14 is silver?

[Nemo_imp]

Mine is pretty much stock other than:

- Road Comet 2 Fairing
- Triumph Scrambler Black Mirrors
- Renthal Street Medium Black Handlebar
- ProGrip 719s
- Renthal Red Bar Ends
- Arrow Slip On Muffler, black ceramic coated
- Ceramic coated headers, black
- Black powder coated fenders
- Black Aluminum Mini Round Turn Signals
- 90 degree red valve stems from Kurvy Girl
- Moriwaki Frame sliders
- Sargent's Seat Modification (dished, widened, contrasting insert & red stitching)
- Hooded Lucas Tail Light Assembly, Powder coated black
- Knurl Retro café oil cap by ZRXMan01
- Metalmaven License Plate Bracket
- Under seat USP Port
- Tender Jr Pig Tail
- K&N Air Filter
- Puerto Rico Quarter Mod
- H4 3800 Lumen LED Headlight module
- O2 Sensor Eliminator Plug
- Kijima Grab Bar, Black
- RLETs
- Kaw Gaiters

I think that's it...


I forgot the Bridgestone Battlax T31 tires in 120/70 and 160/60.

Thant's it... I think...

[peterbaron]

Nemo, your bike looks like a nighthawk,

[GoldOxide_imp]

Mine is pretty much stock other than:

- Road Comet 2 Fairing
- Triumph Scrambler Black Mirrors
- Renthal Street Medium Black Handlebar
- ProGrip 719s
- Renthal Red Bar Ends
- Arrow Slip On Muffler, black ceramic coated
- Ceramic coated headers, black
- Black powder coated fenders
- Black Aluminum Mini Round Turn Signals
- 90 degree red valve stems from Kurvy Girl
- Moriwaki Frame sliders
- Sargent's Seat Modification (dished, widened, contrasting insert & red stitching)
- Hooded Lucas Tail Light Assembly, Powder coated black
- Knurl Retro café oil cap by ZRXMan01
- Metalmaven License Plate Bracket
- Under seat USP Port
- Tender Jr Pig Tail
- K&N Air Filter
- Puerto Rico Quarter Mod
- H4 3800 Lumen LED Headlight module
- O2 Sensor Eliminator Plug
- Kijima Grab Bar, Black
- RLETs
- Kaw Gaiters

I think that's it...


I forgot the Bridgestone Battlax T31 tires in 120/70 and 160/60.

Thant's it... I think...

Yeah, not much going on there.

I think I nominate this CB as the darkest bike on the Forum.

[Bazbro_imp]

I have lots of plans for my 2014 Honda CB1100. I have already installed a full Yoshimura exhaust and Dart Fly Screen.

I have purchased the TSR intake parts for the Air Cleaner and Throttle Bodies to be installed this fall. I will need to do the Air mod to stop engine backfires as you throttle down. So many ways to accomplish this modification. Need to do the Reflash the CPU too. The bike is not broken in yet so I need to wait on this.

Then onto the looks. Honda Carbon Fiber Tank protector. Next to be purchased are the Carbon Fiber Air Filter Cover and Chain Guard. The the Yoshimura Oil Cooler Shield. But to get all these parts I need to sell off some bikes and parts. LOL!

I will round out the bike with getting the full Honda Tool Kit for it. After all these mods I will be done with it. I have to say I love the bike. Just done so right!

OH heck! Yes I installed the most important item... the RLET too!

>

"Full Honda toolkit" Visegrip?? Could you tell me more, please?

And can someone please put me out of my English misery and tell me what "RLETS" is/are, please? Or am I being a twat? Again??

[teamvisegrip_imp]

Yes I am a bit anal about my "Keeper Bikes" I like to find all the accessories for them.

The tool kit is easy just order the parts from Honda.
https://shop.westernhillshondayamaha.com...MGCAF4800A

As for the RLETs... I cannot spoil that for you! I laughed when I found out. So silly but cool looking.
http://cb1100forum.com/forum/showthread.php?tid=2491

I think that covers it.

[Bazbro_imp]

. Thanks, pal!

And I think I'll give those "pencil erasers" a miss... "Wind drag", don'cha know!!