Login

The Spaceman_imp · 07-03-2013, 11:56 PM

I wanted a top case for the bike to carry "commuting" stuff like the half-cover, rain suit, etc. The dealer installed the rack, so I looked at the Honda factory case. With shipping it's almost $700!

I found Shad's SH-29 online and ordered it. It comes with everything you need for under $100. The base plate fits the tail rack like it was made for it. Installation took 10 minutes. The case comes in a number of colors; I ordered red. The case color is lighter than the bike's, and it doesn't have the metal flake. But it's pretty close, and at a glance you might think it came with the bike.

http://www.cycleluggage.com/shad-sh29-top-case.html

ron1100_imp · 07-04-2013, 12:06 AM

Thanks for sharing and posting. I may go for this case based on looks and cost. Do you mind taking pictures of the bike with the case from the side and back as well?

wildezt_imp · 07-04-2013, 01:16 AM

Hi Spaceman,looks great ! Thankyou for sharing ! Is that the Factory rear carrier you have there on the bike ?
Thanks!

Huladog_imp · 07-04-2013, 07:50 AM

Shad makes good stuff. While lesser known than Givi they do produce some OEM bags for BMW, in Spain I think.

I've kept my Shad topcase even though I sold the BMW it was mounted on. Figure I can use it again on some bike since it is made well.

Aloha,
Huladog

The Spaceman_imp · 07-05-2013, 12:13 AM

Yes, its on the factory rack. The baseplate fits it like they made it for the rack.

Can't beat it for $100!

(07-04-2013, 12:06 AM)ron1100_imp Wrote: Thanks for sharing and posting. I may go for this case based on looks and cost. Do you mind taking pictures of the bike with the case from the side and back as well?

Check that link I posted, I sent thvm several pics of the bike they said they'd use on their site.

ron1100_imp · 07-05-2013, 03:23 AM

Thanks. Went to their website but only saw images of the top boxes. I couldn't find any pics of your bike.

wildezt_imp · 07-05-2013, 05:16 AM

(07-05-2013, 12:13 AM)The Spaceman_imp Wrote: Yes, its on the factory rack. The baseplate fits it like they made it for the rack.

Can't beat it for $100!

(07-04-2013, 12:06 AM)ron1100_imp Wrote: Thanks for sharing and posting. I may go for this case based on looks and cost. Do you mind taking pictures of the bike with the case from the side and back as well?

Check that link I posted, I sent thvm several pics of the bike they said they'd use on their site.

Thanks Spaceman !

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	SW-Motech Top Case (All CB1100 Models)	rdprdp01	2	398	08-20-2025, 06:25 AM Last Post: Lord Popgun
	Top box, Givi, Shad or maybe something else?	Davidjill_imp	17	1,049	07-25-2024, 08:22 AM Last Post: Cormanus
	Crank Case Cover removal?	JF Coastal_imp	47	2,331	08-04-2023, 01:26 PM Last Post: Cormanus
	Anyone recommend s a top case for the 13' OEM rear Carrier?	iamlegend21087_imp	14	898	06-21-2023, 08:51 PM Last Post: Tbhart89_imp
	Honda top case install	Jonnyteabag_imp	11	696	12-31-2021, 09:22 AM Last Post: Jonnyteabag_imp
	Givi SR1118 Top Case Rack	active1951_imp	4	386	06-28-2021, 07:08 AM Last Post: Tom_imp
	Apache 4800 top box. (HF/Pelican case)	mvk24_imp	12	651	04-16-2021, 04:01 AM Last Post: the Ferret
	Givi Side Case Racks...Do they exist?	cbolling_imp	21	952	08-28-2020, 08:34 PM Last Post: peterbaron
	Case paint - need a suggestion to match stock	skidmarkart_imp	15	617	03-16-2020, 08:20 PM Last Post: FLYTYM_imp
	Stripping black finish off of 2017 engine case and cylinders	Greaseball_imp	9	572	09-12-2019, 09:59 AM Last Post: pekingduck

Threaded Mode Shad SH-29 Top Case
Author	Message