Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Will '13 accessories fit on the '14?
Author Message
Capo Offline
Road Warrior

Sea Girt, New Jersey
Posts: 1,020
Threads: 51
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2013
Will '13 accessories fit on the '14?
#21

(02-16-2014, 10:15 PM)CB4ME_imp Wrote: Gheil - copy that on the rear rack. I mean - when have dealers ever been wrong? Big Grin

I asked Jerry Finley over at Pirate’s Lair is he knew anything about Staintune's plans with the 2014 Deluxe. Jerry didn't even know about the Deluxe but was going to reach out to Staintune.

Does anyone know if the EX is available in Australia?

If the 2013 staintunes still works on the left side, I would be tempted to order a second one for the Deluxe.

The Staintune has a mount on the inside if the pipe, and for the original heat shield, so no turning it around for the other side of the bike. They will have to develop a two- can solution.


02-16-2014, 10:51 PM
Find Reply
Buffalohead_imp Offline
Been There


Posts: 358
Threads: 10
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2013
RE: Will '13 accessories fit on the '14?
#22

(02-16-2014, 10:41 PM)Cormanus_imp Wrote: The last model imported to Australia was in 2011. I've read somewhere that Honda is not bringing either the standard or EX or Deluxe models to Australia in 2014. Those of us who have one of the 2010 or 2011 models got lucky. Smile

What the heck is Honda thinking? It doesn't make sense!


02-16-2014, 10:52 PM
Find Reply
chrisross_imp Offline
Running Like a Top


Posts: 70
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2014
Will '13 accessories fit on the '14?
#23

(02-16-2014, 10:51 PM)Capo_imp Wrote:
(02-16-2014, 10:15 PM)CB4ME_imp Wrote: Gheil - copy that on the rear rack. I mean - when have dealers ever been wrong? Big Grin

I asked Jerry Finley over at Pirate’s Lair is he knew anything about Staintune's plans with the 2014 Deluxe. Jerry didn't even know about the Deluxe but was going to reach out to Staintune.

Does anyone know if the EX is available in Australia?

If the 2013 staintunes still works on the left side, I would be tempted to order a second one for the Deluxe.

The Staintune has a mount on the inside if the pipe, and for the original heat shield, so no turning it around for the other side of the bike. They will have to develop a two- can solution.

The Staintune has a mount on the inside if the pipe, and for the original heat shield, so no turning it around for the other side of the bike. They will have to develop a two- can solution.
A toucan solution...




Sent from my iPhone using [url=http://tapatalk.com/m?id=1]Tapatalk


02-17-2014, 12:07 AM
Find Reply
CB4ME_imp Offline
Road Warrior


Posts: 1,846
Threads: 183
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2013
RE: Will '13 accessories fit on the '14?
#24

(02-17-2014, 12:07 AM)chrisross_imp Wrote:
(02-16-2014, 10:51 PM)Capo_imp Wrote:
(02-16-2014, 10:15 PM)CB4ME_imp Wrote: Gheil - copy that on the rear rack. I mean - when have dealers ever been wrong? Big Grin

I asked Jerry Finley over at Pirate’s Lair is he knew anything about Staintune's plans with the 2014 Deluxe. Jerry didn't even know about the Deluxe but was going to reach out to Staintune.

Does anyone know if the EX is available in Australia?

If the 2013 staintunes still works on the left side, I would be tempted to order a second one for the Deluxe.

The Staintune has a mount on the inside if the pipe, and for the original heat shield, so no turning it around for the other side of the bike. They will have to develop a two- can solution.

The Staintune has a mount on the inside if the pipe, and for the original heat shield, so no turning it around for the other side of the bike. They will have to develop a two- can solution.
A toucan solution...




Sent from my iPhone using [url=http://tapatalk.com/m?id=1]Tapatalk

an expensive 2 can solution..........

2014 Deluxe owners (paid, pending or contemplating):

I don't think anyone would want to replace the 2 walled stainless steel 4 into 2 headers - that's a prime attraction of the Deluxe IMHO.

But what about slip-ons for better sound (and better performance if you open up the intake side)?

If I pull the trigger, the bike will have the TSR air funnel and K&N filter, a PCV, and a pair of hi-flow slip-ons. Yes, the CAT would still be in place, but the bike's exhaust note and the bike's responsiveness would be a lot better.


02-17-2014, 03:40 AM
Find Reply
flynrider Offline
Road Warrior

Phoenix, AZ
Posts: 2,590
Threads: 28
Likes Received: 6 in 2 posts
Likes Given: 0
Joined: Mar 2013
RE: Will '13 accessories fit on the '14?
#25

(02-16-2014, 10:52 PM)Buffalohead_imp Wrote:
(02-16-2014, 10:41 PM)Cormanus_imp Wrote: The last model imported to Australia was in 2011. I've read somewhere that Honda is not bringing either the standard or EX or Deluxe models to Australia in 2014. Those of us who have one of the 2010 or 2011 models got lucky. Smile

What the heck is Honda thinking? It doesn't make sense!

What the heck is Honda thinking? It doesn't make sense!
It makes some sense. The CB11 didn't really take off in Australia the way they hoped. From what I heard, last year some Australian dealers still had unsold 2011 models on the floor.


02-17-2014, 10:43 AM
Find Reply
Buffalohead_imp Offline
Been There


Posts: 358
Threads: 10
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2013
RE: Will '13 accessories fit on the '14?
#26

(02-17-2014, 10:43 AM)Flynrider_imp Wrote:
(02-16-2014, 10:52 PM)Buffalohead_imp Wrote:
(02-16-2014, 10:41 PM)Cormanus_imp Wrote: The last model imported to Australia was in 2011. I've read somewhere that Honda is not bringing either the standard or EX or Deluxe models to Australia in 2014. Those of us who have one of the 2010 or 2011 models got lucky. Smile

What the heck is Honda thinking? It doesn't make sense!

What the heck is Honda thinking? It doesn't make sense!
It makes some sense. The CB11 didn't really take off in Australia the way they hoped. From what I heard, last year some Australian dealers still had unsold 2011 models on the floor.

Actually, that's the only thing it could be. After all, Honda is in business to sell bikes. I can't imagine why they would sell good elsewhere but not in Australia. It's really a bummer for guy's like Cormanus who are going to want a new one sooner or later. Too bad it's not possible to buy one elsewhere and have it shipped. But, of course that's illegal.


02-17-2014, 11:23 AM
Find Reply
CB4ME_imp Offline
Road Warrior


Posts: 1,846
Threads: 183
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2013
RE: Will '13 accessories fit on the '14?
#27

Reply from Staintune to Jerry Finley of Prirates Lair who has best prices of Staintune exhausts:

Hi Jerry,
I am very sorry to say that Honda Australia will not be selling the CB1100F here this year or next.
We will not be able to get a bike to make the Deluxe twin pipes on.
This is very disappointing for us as the CB1100 has been one of our top sellers.
Kind Regards
Adam / Staintune

2014 Deluxe owners wishing to have a better sounding exhaust and a boost in performance will need to find another slip-on manufacturer.

IMHO Staintune offers the best built, best looking slip-on that preserves the overall look of the bike and produces an excellent exhaust note. This is disappointing, especially for everyone in Australia.


02-18-2014, 10:17 PM
Find Reply
Cormanus Offline
Super Moderator

Queensland, Australia
Posts: 16,119
Threads: 342
Likes Received: 667 in 366 posts
Likes Given: 777
Joined: Apr 2025
RE: Will '13 accessories fit on the '14?
#28

(02-17-2014, 11:23 AM)Buffalohead_imp Wrote:
(02-17-2014, 10:43 AM)Flynrider_imp Wrote:
(02-16-2014, 10:52 PM)Buffalohead_imp Wrote:
(02-16-2014, 10:41 PM)Cormanus_imp Wrote: The last model imported to Australia was in 2011. I've read somewhere that Honda is not bringing either the standard or EX or Deluxe models to Australia in 2014. Those of us who have one of the 2010 or 2011 models got lucky. Smile

What the heck is Honda thinking? It doesn't make sense!

What the heck is Honda thinking? It doesn't make sense!
It makes some sense. The CB11 didn't really take off in Australia the way they hoped. From what I heard, last year some Australian dealers still had unsold 2011 models on the floor.

Actually, that's the only thing it could be. After all, Honda is in business to sell bikes. I can't imagine why they would sell good elsewhere but not in Australia. It's really a bummer for guy's like Cormanus who are going to want a new one sooner or later. Too bad it's not possible to buy one elsewhere and have it shipped. But, of course that's illegal.

Actually, that's the only thing it could be. After all, Honda is in business to sell bikes. I can't imagine why they would sell good elsewhere but not in Australia. It's really a bummer for guy's like Cormanus who are going to want a new one sooner or later. Too bad it's not possible to buy one elsewhere and have it shipped. But, of course that's illegal.
Kind of you. Actually, I rather hope I can make this one last. If I look after it and ride it carefully and contain my natural enthusiasm for the new, I might make it.

(02-18-2014, 10:17 PM)CB4ME_imp Wrote: Reply from Staintune to Jerry Finley of Prirates Lair who has best prices of Staintune exhausts:

Hi Jerry,
I am very sorry to say that Honda Australia will not be selling the CB1100F here this year or next.
We will not be able to get a bike to make the Deluxe twin pipes on.
This is very disappointing for us as the CB1100 has been one of our top sellers.
Kind Regards
Adam / Staintune

2014 Deluxe owners wishing to have a better sounding exhaust and a boost in performance will need to find another slip-on manufacturer.

IMHO Staintune offers the best built, best looking slip-on that preserves the overall look of the bike and produces an excellent exhaust note. This is disappointing, especially for everyone in Australia.

It's not only sad for us in Australia, but also for Staintune (because they're losing a market and export opportunity) and the rest of the world (because you won't be able to buy their product).


02-18-2014, 10:43 PM
Find Reply
CB4ME_imp Offline
Road Warrior


Posts: 1,846
Threads: 183
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2013
RE: Will '13 accessories fit on the '14?
#29

(02-18-2014, 10:43 PM)Cormanus_imp Wrote:
(02-17-2014, 11:23 AM)Buffalohead_imp Wrote:
(02-17-2014, 10:43 AM)Flynrider_imp Wrote:
(02-16-2014, 10:52 PM)Buffalohead_imp Wrote:
(02-16-2014, 10:41 PM)Cormanus_imp Wrote: The last model imported to Australia was in 2011. I've read somewhere that Honda is not bringing either the standard or EX or Deluxe models to Australia in 2014. Those of us who have one of the 2010 or 2011 models got lucky. Smile

What the heck is Honda thinking? It doesn't make sense!

What the heck is Honda thinking? It doesn't make sense!
It makes some sense. The CB11 didn't really take off in Australia the way they hoped. From what I heard, last year some Australian dealers still had unsold 2011 models on the floor.

Actually, that's the only thing it could be. After all, Honda is in business to sell bikes. I can't imagine why they would sell good elsewhere but not in Australia. It's really a bummer for guy's like Cormanus who are going to want a new one sooner or later. Too bad it's not possible to buy one elsewhere and have it shipped. But, of course that's illegal.

Actually, that's the only thing it could be. After all, Honda is in business to sell bikes. I can't imagine why they would sell good elsewhere but not in Australia. It's really a bummer for guy's like Cormanus who are going to want a new one sooner or later. Too bad it's not possible to buy one elsewhere and have it shipped. But, of course that's illegal.
Kind of you. Actually, I rather hope I can make this one last. If I look after it and ride it carefully and contain my natural enthusiasm for the new, I might make it.

(02-18-2014, 10:17 PM)CB4ME_imp Wrote: Reply from Staintune to Jerry Finley of Prirates Lair who has best prices of Staintune exhausts:

Hi Jerry,
I am very sorry to say that Honda Australia will not be selling the CB1100F here this year or next.
We will not be able to get a bike to make the Deluxe twin pipes on.
This is very disappointing for us as the CB1100 has been one of our top sellers.
Kind Regards
Adam / Staintune

2014 Deluxe owners wishing to have a better sounding exhaust and a boost in performance will need to find another slip-on manufacturer.

IMHO Staintune offers the best built, best looking slip-on that preserves the overall look of the bike and produces an excellent exhaust note. This is disappointing, especially for everyone in Australia.

It's not only sad for us in Australia, but also for Staintune (because they're losing a market and export opportunity) and the rest of the world (because you won't be able to buy their product).

Agreed! But 2014 Standard owners will still have the opportunity to purchase this fine product.


02-19-2014, 12:15 AM
Find Reply
Scoobynut_imp Offline
Been There


Posts: 402
Threads: 14
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
RE: Will '13 accessories fit on the '14?
#30

(02-18-2014, 10:17 PM)CB4ME_imp Wrote: Reply from Staintune to Jerry Finley of Prirates Lair who has best prices of Staintune exhausts:

Hi Jerry,
I am very sorry to say that Honda Australia will not be selling the CB1100F here this year or next.
We will not be able to get a bike to make the Deluxe twin pipes on.
This is very disappointing for us as the CB1100 has been one of our top sellers.
Kind Regards
Adam / Staintune

2014 Deluxe owners wishing to have a better sounding exhaust and a boost in performance will need to find another slip-on manufacturer.

IMHO Staintune offers the best built, best looking slip-on that preserves the overall look of the bike and produces an excellent exhaust note. This is disappointing, especially for everyone in Australia.

Would they necessarily need the whole bike? What if they had only the stock Deluxe exhausts sent to them by someone next winter? Wouldn't that be enough for them to determine the dimensions and the mounting points etc.?


02-19-2014, 04:20 AM
Find Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  oem parts accessories 1973cb750 20 670 01-29-2026, 06:52 PM
Last Post: 1973cb750
  2017 EX Accessories at Samurider CB4ME_imp 7 507 01-29-2026, 05:41 PM
Last Post: JRD
  2014 DLX Accessories kzoorue_imp 12 745 05-12-2022, 08:28 AM
Last Post: Nachodaddy
  Download Installation Instructions for Honda Accessories CB4ME_imp 10 529 02-28-2021, 04:55 PM
Last Post: Griff_imp
  Aftermarket parts and accessories Moe_rider_imp 11 759 10-31-2019, 08:17 PM
Last Post: Moe_rider_imp
  Flytech's Mods & Accessories Flytech99_imp 24 1,237 04-24-2018, 11:45 AM
Last Post: Hondakid_imp
  Honda accessories kennyw 14 793 09-18-2017, 10:49 PM
Last Post: will866_imp
  Factory accessories (2017) spacetiger_imp 2 284 03-20-2017, 02:01 AM
Last Post: mrbi0_imp
  Mods & accessories done so far dsinned_imp 18 1,019 12-01-2016, 10:26 AM
Last Post: dsinned_imp
  2014 Std - First Set of Accessories venturer434_imp 51 2,054 10-22-2016, 12:18 AM
Last Post: Lord Popgun

Forum Jump:


Users browsing this thread: 1 Guest(s)