Login

Honda4Ed_imp · 07-19-2013, 05:00 PM

[quote='FUZZY' pid='7635' dateline='1373926309']
I took mine apart. The inside is very restrictive Undecided

I just installed the Two Brothers Titanium. Very easy, looks great and the sound is up. I need more time for break in and to decide how much I like it. It is definitely not in the same category as my 1970 cb750 stock 4 into 4.

mininsx_imp · 07-19-2013, 11:56 PM

(07-19-2013, 05:00 PM)Honda4Ed_imp Wrote: [quote='FUZZY' pid='7635' dateline='1373926309']
I took mine apart. The inside is very restrictive

I just installed the Two Brothers Titanium. Very easy, looks great and the sound is up. I need more time for break in and to decide how much I like it. It is definitely not in the same category as my 1970 cb750 stock 4 into 4.

I've got a TBR carbon on my Concours 14 and really like it. It's relatively quiet when you want it to be and screams when you get on it.

mininsx_imp · 07-29-2013, 02:03 AM

Well, I got adventurous the other day and drilled two 5/16" holes in the baffle that you see when you look inside the muffler outlet and it no difference in the sound at all. Sad

the Ferret · 07-29-2013, 02:08 AM

Arrrggghhh I would hate drilling into my brand new chromed exhaust system for nothing. Sorry it didn't work out for you, but thanks for warning others so they don't make the same mistake.

FUZZY_imp · 07-29-2013, 02:13 AM

(07-29-2013, 02:03 AM)mininsx_imp Wrote: Well, I got adventurous the other day and drilled two 5/16" holes in the baffle that you see when you look inside the muffler outlet and it no difference in the sound at all.

Yea the inside of that muffler flows like a loopty loop. Not much you can do.

mininsx_imp · 07-30-2013, 01:32 AM

(07-29-2013, 02:08 AM)The ferret_imp Wrote: Arrrggghhh I would hate drilling into my brand new chromed exhaust system for nothing. Sorry it didn't work out for you, but thanks for warning others so they don't make the same mistake.

That was my idea, to tell others, "Don't waste your time!"

ChipBeck_imp · 07-30-2013, 01:57 AM

(07-29-2013, 02:13 AM)FUZZY_imp Wrote:
(07-29-2013, 02:03 AM)mininsx_imp Wrote: Well, I got adventurous the other day and drilled two 5/16" holes in the baffle that you see when you look inside the muffler outlet and it no difference in the sound at all.
Yea the inside of that muffler flows like a loopty loop. Not much you can do.

Gentlemen,

Yes, with the stock slip on the exhaust gasses flow the length of that pipe 3 times before they exit. All the way to the end along the outside where they make a 180 turn and flow back tword the front of the bike and make another 180 turn and then back down the center of the pipe and out of the rear opening. You will not change the sound much unless you gut that muffler to eleminate those two 180 turns. Aftermarket slip ons flow straight through.

Chip

Offroad · 05-02-2014, 01:12 PM

(07-30-2013, 01:57 AM)ChipBeck_imp Wrote:
(07-29-2013, 02:13 AM)FUZZY_imp Wrote:
(07-29-2013, 02:03 AM)mininsx_imp Wrote: Well, I got adventurous the other day and drilled two 5/16" holes in the baffle that you see when you look inside the muffler outlet and it no difference in the sound at all.
Yea the inside of that muffler flows like a loopty loop. Not much you can do.

Gentlemen,

Yes, with the stock slip on the exhaust gasses flow the length of that pipe 3 times before they exit. All the way to the end along the outside where they make a 180 turn and flow back tword the front of the bike and make another 180 turn and then back down the center of the pipe and out of the rear opening. You will not change the sound much unless you gut that muffler to eleminate those two 180 turns. Aftermarket slip ons flow straight through.

Chip

Gentlemen,

Yes, with the stock slip on the exhaust gasses flow the length of that pipe 3 times before they exit. All the way to the end along the outside where they make a 180 turn and flow back tword the front of the bike and make another 180 turn and then back down the center of the pipe and out of the rear opening. You will not change the sound much unless you gut that muffler to eleminate those two 180 turns. Aftermarket slip ons flow straight through.

Chip
I wonder how hard it would be to "gut" the interior of that stock muffler?

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Stock Muffler	jbird06_imp	8	676	05-02-2024, 11:21 AM Last Post: PowerDubs_imp
	QD exhaust for CB1100EX twin muffler	arata194_imp	2	312	07-11-2021, 09:02 PM Last Post: GoldOxide_imp
	Delkevic Muffler slip-on	wgscheib_imp	2	351	06-08-2021, 01:48 AM Last Post: GoldOxide_imp
	New Delkevic muffler	edillen1_imp	2	342	07-20-2020, 03:55 PM Last Post: michael1954
	Modify stock muffler?	DBM_imp	2	323	07-30-2018, 05:08 PM Last Post: FLYTYM_imp
	Gut Factory Muffler	Offroad	94	5,061	07-28-2016, 11:53 PM Last Post: kennyw
	Muffler Slip On's	Southwend	22	1,332	07-01-2016, 08:06 PM Last Post: ludva12345_imp
	New Muffler	gcarper_imp	21	1,330	06-23-2016, 03:08 PM Last Post: dsinned_imp
	Helix muffler	Highwayhound_imp	2	247	05-06-2016, 01:17 PM Last Post: Highwayhound_imp
	Factory muffler with a baffle cut out	WayFast86_imp	1	205	04-11-2016, 05:45 AM Last Post: Lord Popgun

Threaded Mode Drilling muffler
Author	Message