Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Crash bars make me crash
#31
Which crash bar would you want on your bike?

Notice the lower mounting point on the frame and where the bottom bar starts off. Some bars angle up, others go out at a right angle. Seems the latter reduce cornering clearance more than the former.

These bars angle up from the lower mounting point:

SW Motech
[Image: 4971de33043a34e59e07efaf7b5e55c3.jpg]

Active
[Image: bd6a2ea9a546c4bd9049ccf6a3bf3228.jpg]

Honda (nice and tucked in)
[Image: c4da944d73e93929288c4078c2a270ca.jpg]

These, not so good - bottom bar angles straight out:

Over
[Image: a41f935c058c1d84f1030644a942298f.jpg]

Kijma
[Image: 0edb3e79d3490a429e468f0ea482ce78.jpg]


At least the Over bottom bar starts above the frame which helps increase cornering clearance.

Not so with the Kijma. Bottom bar starts low AND goes straight out:

[Image: 26523a058e8ff108b620414f757d979f.jpg]
Reply
#32
There is a very important lesson here.


Sent from my iPad using Tapatalk
Reply
#33
I had crash bars almost crash me 40 years ago, but for a different reason. On my Honda CB350 I had crash bars that had foot pegs inside of them that let me put my foot forward like a cruiser. So one day I popped over a hill doing 50+ and there sat a car dead stopped making a left hand turn. First I locked up both front and rear brakes, but I could tell that wasn’t going to work, so at the last moment I let off the brakes and tried to turn to the right. I thought for sure my left leg was going to hit the bumper of that car, but it barely missed. However the crash bars did hit the bumper (that’s how close this was). Luckily for me, the welds on the brackets at the bottom of the crash bars failed so the crash bars were just hanging on by the U-Bolt at the top. I took those crash bars off after that and figured if I ever had to lay the bike down, I’d just get my bottom leg out like a hurdler ;-)
Reply
#34
(06-06-2014, 08:17 PM)Tortuga_imp Wrote: The only scientific way to test this lean angle conundrum is to go to a supermarket car park when they're closed. Set up your camera on the ground to film the event.

Ride in ever decreasing circles one way and wait for the 'schreeechh'. Cease riding and check video.

Partake of a nerve calming beverage (non alcoholic) and repeat for the other side / direction.

Ride home, post the footage on YouTube, and post us a link here. Simples.


Is there such a thing? I could use just that on a daily basis. Root Beer is my go-to cold drink. Coffee the rest of the time; its hardly nerve-calming...

What's your prescription, Doctor?
Reply
#35
I just found this thread, thanks so much for sharing your story! I was thinking about the Kijima crash bars too...
Reply
#36
Just skimmed through this older thread too. I have the SW Motech 'engine guards'. There not terribly large, but big enough. I also think they could never hit as described in the OP.
Reply
#37
Ugh just read this... I have ordered some engine guards just like his... maybe I can return them when they are finally delivered.

Maybe modify them? [Image: af2b9a56a625ba73f45d3d73a0a1ffbf.jpg]


Sent from my iPhone using Tapatalk
Reply
#38
Hahaha! I got EXACTLY the ones warned about [Image: 20a8a8929dbe663305f8279b8c2ae450.png][Image: 29816b7564c834e4970a7966f5e580bc.png][Image: cca7829d53debbe1fb732a62c739cebb.png]


Sent from my iPhone using Tapatalk
Reply
#39
I wouldn’t use them. You have been warned.

I have sliders on my bike. Dont know how good they work and hope to never find out!
Reply
#40
Roger that. I should be able to just return them. Probably have to pay for shipping but better that than risk snagging them on the road.


Sent from my iPhone using Tapatalk
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Do they still make motorcycle commercials? pdedse 6 478 09-11-2022, 08:53 AM
Last Post: misterprofessionality
  Crash Bobbins or bars Maturecheese_imp 14 754 07-04-2022, 02:29 PM
Last Post: run-tmc_imp
  Rust on tank from crash calipo223_imp 6 452 09-17-2020, 05:06 PM
Last Post: jtopiso_imp
  How to make the CB1100rs perform better Saltani_imp 26 1,782 12-15-2019, 04:07 AM
Last Post: GoldOxide_imp
  Just purchased 2013 CB1100. Buzzy Bars ambbmw_imp 14 978 02-18-2018, 11:59 PM
Last Post: Marcosss_imp
  Had a small crash jermo47_imp 17 843 09-25-2017, 10:37 AM
Last Post: dsan1964_imp
  Crash Bars for an other bike activedirt_imp 0 158 08-18-2017, 02:26 AM
Last Post: activedirt_imp
  Engine Guards / Crash Bars RonLyke_imp 93 5,246 06-02-2017, 09:55 AM
Last Post: Lord Popgun
  Any interest in sissy bars? PowerDubs_imp 85 3,437 05-15-2017, 01:11 PM
Last Post: Cormanus
  How Are New Bikes Handle Bars Positioned Aka Tsubasa_imp 19 994 05-14-2017, 10:24 AM
Last Post: BestStandard_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)