Windscreen that fits 2014

[hdvalente_imp]

Mr. T has not replied yet so I ordered a Daytona Blaster Barrier windscreen (tinted) from Webike. It should be here next week and total cost with expedite shipping was $149.

I may order the Road Comet with matching colors in the future and sell this one.

[johnf514_imp]

I have the Puig 0869N on my 2014. The windscreen touches the gauge cluster, but the pads they provide keep the two from rubbing together. Good, cheap solution.

[hdvalente_imp]

I have the Puig 0869N on my 2014. The windscreen touches the gauge cluster, but the pads they provide keep the two from rubbing together. Good, cheap solution.

That's the one I ordered initially but I didn't want to use the pads since they may get displaced and eventually get in contact with the gauge cluster. Also I think the height is a bit too high when compared to the suggested height from other members (~10" above the key).
Thanks for the picture though!

[JEB_imp]

I just rode first time today after installing Puig 7593W and it was quite an improvement. I've read comments on revzilla - where I bought it - about this small screen not stopping wind noise, wind force on helmet etc. I didn't expect that because it's a motorcyle. But it did make the bike much more stable in considerable crosswind today. Engine seemed less labored at 80 and I didn't have feeling that it might just take another direction on elevated, curving interstate overpasses. Definitely an improvement. When I got home didn't fell like had taken a beating. Ear plugs would still be advisable for younger people who can still hear. For 130 dollars it seems like a good place to start. It does not rub instruments although it's very close on R. I can pass card stock through the clearance with no friction. I'll watch for vibration marks and if needed will just put a washer between the mounting foot and fork pinch clamp for a little extra clearance if needed. It's my first add and I'm happy. Have one subtraction of a sissy bar combined with luggage rack that removed before first ride because it was butt ugly. I bought this 2014 base model in march with 940 miles by first owner who decided he needed a BMW.


Sent from my iPhone using Tapatalk

[gtmn_imp]

i have the direct fit puig from revzilla and i really like it but i like my helmet in clean air for less turbulence
it hits on the shoulders but thats good for me
it does need to be painted though, in the sun its gray not nearly black enough

[hdvalente_imp]

I just rode first time today after installing Puig 7593W and it was quite an improvement. I've read comments on revzilla - where I bought it - about this small screen not stopping wind noise, wind force on helmet etc. I didn't expect that because it's a motorcyle. But it did make the bike much more stable in considerable crosswind today. Engine seemed less labored at 80 and I didn't have feeling that it might just take another direction on elevated, curving interstate overpasses. Definitely an improvement. When I got home didn't fell like had taken a beating. Ear plugs would still be advisable for younger people who can still hear. For 130 dollars it seems like a good place to start. It does not rub instruments although it's very close on R. I can pass card stock through the clearance with no friction. I'll watch for vibration marks and if needed will just put a washer between the mounting foot and fork pinch clamp for a little extra clearance if needed. It's my first add and I'm happy. Have one subtraction of a sissy bar combined with luggage rack that removed before first ride because it was butt ugly. I bought this 2014 base model in march with 940 miles by first owner who decided he needed a BMW.


Sent from my iPhone using Tapatalk

Nice! Congratulations on the new bike!

Sent from my VS990 using Tapatalk

i have the direct fit puig from revzilla and i really like it but i like my helmet in clean air for less turbulence
it hits on the shoulders but thats good for me
it does need to be painted though, in the sun its gray not nearly black enough

I ordered this Daytona Blaster Barrier windscreen. I will post pictures and impressions once I receive it next week.

Sent from my VS990 using Tapatalk

[hdvalente_imp]

Update:
I received the Daytona windscreen today. Shipping was pretty fast with express option (FedEx).

It's very well made, I like it!

I did a preliminary install (my headlight is not installed because I am working on the GPS wiring and can't find the connector that I purchased over a year ago so ended up ordering another one) and to avoid touching the instruments you have to mount it a little bit forward. I measured from key to top of windscreen and it's 9.5".

I will post pictures next week once I get the GPS wiring done.

[hdvalente_imp]

Package

[VAslim16_imp]

Package

Definitely keep us updated on the screen. I am thinking about getting one depending on how it works for you.

[hdvalente_imp]

Package

Definitely keep us updated on the screen. I am thinking about getting one depending on how it works for you.

Definitely keep us updated on the screen. I am thinking about getting one depending on how it works for you. Will do!

Sent from my VS990 using Tapatalk