Acewell Speedometer

[arse-onist_imp]

I'll try it out and will update.

[arse-onist_imp]

OK so moving forward from the speedometer gauge. I checked some YouTube guides and managed to find the tyre circumference number. For those of you who are interested, the number is between 1850-1900. You have to play around with that number.

Now, I'm playing around with the fuel gauge meter. If only I have an ohmmeter with me.

[Lord Popgun]

I don’t think Max listed it, so here is the resistance of the fuel sensor:
8-12ohms Full, and 213-219ohms Empty. If that helps you any.

[arse-onist_imp]

I don’t think Max listed it, so here is the resistance of the fuel sensor:
8-12ohms Full, and 213-219ohms Empty. If that helps you any.

that actually helps a lot!

[arse-onist_imp]

Question.

Anybody know the size of the bolts for the front disc brakes? The tiny magnet isn't cutting it when I'm going over 110kmph as it keeps jumping.

http://www.acewell.co.uk/Acewell%20Acces.../index.htm

Sorry for the noob question.

[max]

does the fuel gauge work now and if so what setting did you use?

[arse-onist_imp]

does the fuel gauge work now and if so what setting did you use?

I'll get back to you on Friday for that. I think there was an issue with the wiring so I wanna see if the current sender works with the fuel gauge. Fingers crossed!

[arse-onist_imp]

Welp! Managed to get everything in check. Now everything works as intended.
The fuel gauge issue was because the shop that I sent to for the initial installation kinda misread it. I had to get a second opinion from another shop to get it right.

According to him, there were only 1 wire connected to the meter instead of 2.

Anyways, here are some images.

(I'm still not good at this)

[max]

Thanks for the photo's, seems you have a full tank and the grey/black wire is back in action, it must be confusing without a diagram but you got it done anyway, thanks for the update and best wishes.

[Cormanus]

Well done arson-ist. There's no way to link from Google photos so the pictures display on the forum. For that you'll need Imgur or Postimage or Photobucket.