Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Buying a CB1100 what am I changing first?
Author Message
NickLHG_imp Offline
First Service Completed


Posts: 31
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2019
RE: Buying a CB1100 what am I changing first?
#21



(12-25-2019, 11:21 AM)Lord Popgun_imp Wrote: What LR said. The K&N is a waste of time and money. And yeah its fuel injected Smile

I like Angel GT tires. Most here like Michelin PR3s (if you can find them) for high mileage. The Pirelli GTs grip like nobodies business but don’t last long. I don’t care. I want grip!

And the first mod should be RLETS or a padawan learner you will be.

Alrighty thanks for the info. What are your thoughts on Pirelli sport demon tires?
(12-25-2019, 02:05 PM)GoldOxide_imp Wrote: Nick: Now you have done it. Your question illicited a response regarding RLETs. By inadvertently doing this, ... gosh, ... I'm not sure how this will turn out.

Maybe nothing will happen. [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3454]PB did not counter popgun, so let's hope for [url=https://www.youtube.com/watch?v=b98YFK5Oubo]Peace In The Valley.

What exactly is RLETs?
(12-26-2019, 03:59 AM)max_imp Wrote: After 5 years it would be a good start to change the 2 brake fluid and 1 clutch fluid systems, ( should be done every 3 or so years ) brake fluid is hygroscopic which means it absorbs moisture from the air and that moisture then starts eating away your brake system from the inside, so if not already done so by the previous owner that would be a strategic move.

Also beware of k&n oil filters with a spot welded nut for "easy removal" of the filter, these have been known to break and conveniantly produce a lot of oil just where your rear wheel makes contact with the road, many video's on youtube on that subject and good;"i went on holiday and...." stories.

Each to their own but i wanted to change some things too but after a while just started to appreciate the bike just as it came out of the factory and changed nothing exept recently got a corbin seat for it which i use on the longer trips, recently drove for 9 hours and had zero issues as opposed to the (low) standard which gets uncomfortable after 2 hours for me.

Congratulations on the new bike.









'


12-26-2019, 04:10 AM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: Buying a CB1100 what am I changing first?
#22



(12-26-2019, 04:10 AM)NickLHG_imp Wrote:
(12-25-2019, 11:21 AM)Lord Popgun_imp Wrote: What LR said. The K&N is a waste of time and money. And yeah its fuel injected Smile

I like Angel GT tires. Most here like Michelin PR3s (if you can find them) for high mileage. The Pirelli GTs grip like nobodies business but don’t last long. I don’t care. I want grip!

And the first mod should be RLETS or a padawan learner you will be.

Alrighty thanks for the info. What are your thoughts on Pirelli sport demon tires?
(12-25-2019, 02:05 PM)GoldOxide_imp Wrote: Nick: Now you have done it. Your question illicited a response regarding RLETs. By inadvertently doing this, ... gosh, ... I'm not sure how this will turn out.

Maybe nothing will happen. [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3454]PB did not counter popgun, so let's hope for [url=https://www.youtube.com/watch?v=b98YFK5Oubo]Peace In The Valley.

What exactly is RLETs?
(12-26-2019, 03:59 AM)max_imp Wrote: After 5 years it would be a good start to change the 2 brake fluid and 1 clutch fluid systems, ( should be done every 3 or so years ) brake fluid is hygroscopic which means it absorbs moisture from the air and that moisture then starts eating away your brake system from the inside, so if not already done so by the previous owner that would be a strategic move.

Also beware of k&n oil filters with a spot welded nut for "easy removal" of the filter, these have been known to break and conveniantly produce a lot of oil just where your rear wheel makes contact with the road, many video's on youtube on that subject and good;"i went on holiday and...." stories.

Each to their own but i wanted to change some things too but after a while just started to appreciate the bike just as it came out of the factory and changed nothing exept recently got a corbin seat for it which i use on the longer trips, recently drove for 9 hours and had zero issues as opposed to the (low) standard which gets uncomfortable after 2 hours for me.

Congratulations on the new bike.









'



12-26-2019, 04:22 AM
Find Reply
pdedse Offline
Moderator


Posts: 3,063
Threads: 119
Likes Received: 774 in 326 posts
Likes Given: 781
Joined: Apr 2025
RE: Buying a CB1100 what am I changing first?
#23



(12-26-2019, 04:22 AM)GoldOxide_imp Wrote:
(12-26-2019, 04:10 AM)NickLHG_imp Wrote:
(12-25-2019, 11:21 AM)Lord Popgun_imp Wrote: What LR said. The K&N is a waste of time and money. And yeah its fuel injected Smile

I like Angel GT tires. Most here like Michelin PR3s (if you can find them) for high mileage. The Pirelli GTs grip like nobodies business but don’t last long. I don’t care. I want grip!

And the first mod should be RLETS or a padawan learner you will be.

Alrighty thanks for the info. What are your thoughts on Pirelli sport demon tires?
(12-25-2019, 02:05 PM)GoldOxide_imp Wrote: Nick: Now you have done it. Your question illicited a response regarding RLETs. By inadvertently doing this, ... gosh, ... I'm not sure how this will turn out.

Maybe nothing will happen. [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3454]PB did not counter popgun, so let's hope for [url=https://www.youtube.com/watch?v=b98YFK5Oubo]Peace In The Valley.

What exactly is RLETs?
(12-26-2019, 03:59 AM)max_imp Wrote: After 5 years it would be a good start to change the 2 brake fluid and 1 clutch fluid systems, ( should be done every 3 or so years ) brake fluid is hygroscopic which means it absorbs moisture from the air and that moisture then starts eating away your brake system from the inside, so if not already done so by the previous owner that would be a strategic move.

Also beware of k&n oil filters with a spot welded nut for "easy removal" of the filter, these have been known to break and conveniantly produce a lot of oil just where your rear wheel makes contact with the road, many video's on youtube on that subject and good;"i went on holiday and...." stories.

Each to their own but i wanted to change some things too but after a while just started to appreciate the bike just as it came out of the factory and changed nothing exept recently got a corbin seat for it which i use on the longer trips, recently drove for 9 hours and had zero issues as opposed to the (low) standard which gets uncomfortable after 2 hours for me.

Congratulations on the new bike.









'

Yeah, but how to install them?ROFL


12-26-2019, 05:08 AM
Find Reply
peterbaron Offline
Road Warrior

ON, Canada
Posts: 7,073
Threads: 94
Likes Received: 573 in 311 posts
Likes Given: 954
Joined: Apr 2025
RE: Buying a CB1100 what am I changing first?
#24



(12-25-2019, 12:15 PM)Chuckk_imp Wrote: ohh boy.. here we go with the RLETs.. haha.. a big welcome Nick from California..
(12-26-2019, 04:22 AM)GoldOxide_imp Wrote:
(12-26-2019, 04:10 AM)NickLHG_imp Wrote:
(12-25-2019, 11:21 AM)Lord Popgun_imp Wrote: What LR said. The K&N is a waste of time and money. And yeah its fuel injected Smile

I like Angel GT tires. Most here like Michelin PR3s (if you can find them) for high mileage. The Pirelli GTs grip like nobodies business but don’t last long. I don’t care. I want grip!

And the first mod should be RLETS or a padawan learner you will be.

Alrighty thanks for the info. What are your thoughts on Pirelli sport demon tires?
(12-25-2019, 02:05 PM)GoldOxide_imp Wrote: Nick: Now you have done it. Your question illicited a response regarding RLETs. By inadvertently doing this, ... gosh, ... I'm not sure how this will turn out.

Maybe nothing will happen. [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3454]PB did not counter popgun, so let's hope for [url=https://www.youtube.com/watch?v=b98YFK5Oubo]Peace In The Valley.

What exactly is RLETs?
(12-26-2019, 03:59 AM)max_imp Wrote: After 5 years it would be a good start to change the 2 brake fluid and 1 clutch fluid systems, ( should be done every 3 or so years ) brake fluid is hygroscopic which means it absorbs moisture from the air and that moisture then starts eating away your brake system from the inside, so if not already done so by the previous owner that would be a strategic move.

Also beware of k&n oil filters with a spot welded nut for "easy removal" of the filter, these have been known to break and conveniantly produce a lot of oil just where your rear wheel makes contact with the road, many video's on youtube on that subject and good;"i went on holiday and...." stories.

Each to their own but i wanted to change some things too but after a while just started to appreciate the bike just as it came out of the factory and changed nothing exept recently got a corbin seat for it which i use on the longer trips, recently drove for 9 hours and had zero issues as opposed to the (low) standard which gets uncomfortable after 2 hours for me.

Congratulations on the new bike.









'

ohh boy o boy o boy,,,,ROFL


12-26-2019, 05:09 AM
Find Reply
Lord Popgun Offline
El Supremo RLET Force

Virginia
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 136
Joined: Apr 2025
RE: Buying a CB1100 what am I changing first?
#25



Learn a Padawan must. Long the journey can be. Easy answers does not make a CB master.


12-26-2019, 06:20 AM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: Buying a CB1100 what am I changing first?
#26



Just like what popgun said.




Actually, there are a few long threads in the Forum regarding these thingies.


12-26-2019, 06:59 AM
Find Reply
Cormanus Offline
Moderator

Queensland, Australia
Posts: 16,279
Threads: 346
Likes Received: 827 in 455 posts
Likes Given: 963
Joined: Apr 2025
RE: Buying a CB1100 what am I changing first?
#27



NickLHG, essential reading:

http://cb1100forum.com/forum/showthread.php?tid=5505

http://cb1100forum.com/forum/showthread.php?tid=2491

Time you will need.


12-26-2019, 07:39 AM
Find Reply
Houtman_imp Offline
Road Warrior


Posts: 3,881
Threads: 115
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
RE: Buying a CB1100 what am I changing first?
#28



Do not overthink buying a new bike , some research yes most you will find out after you own the bike.


12-26-2019, 09:38 AM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: Buying a CB1100 what am I changing first?
#29



(12-26-2019, 09:38 AM)Houtman_imp Wrote: Do not overthink buying a new bike , some research yes most you will find out after you own the bike.

T'is the truth.


12-26-2019, 10:34 AM
Find Reply
pdedse Offline
Moderator


Posts: 3,063
Threads: 119
Likes Received: 774 in 326 posts
Likes Given: 781
Joined: Apr 2025
RE: Buying a CB1100 what am I changing first?
#30



Whose hand is it that's holding the RLETs? It sure looks like mine except the lines on the palm don't match. [url=http://cb1100forum.com/forum/attachment.php?aid=10660]Is that my hand!?!!? Or is it someone else's?


12-26-2019, 11:23 AM
Find Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Michelin PR3's: where are you buying them? misterprofessionality 7 614 05-03-2018, 04:36 PM
Last Post: Cormanus
  Changing 4 into 1 to 4 into 2 exhaust Mscb1100_imp 16 1,034 03-05-2018, 09:04 AM
Last Post: use2b_imp
  Ceramic black coating stock exhaust vs. buying aftermarket pipes? Rebel73_imp 5 559 02-24-2015, 02:06 AM
Last Post: AllenM_imp
  I'm close to buying this exhaust, BUT Inline4_imp 46 2,605 02-08-2015, 07:30 AM
Last Post: Inline4_imp
  Buying Japanese accessories now easier CB4ME_imp 17 1,042 07-16-2013, 12:23 AM
Last Post: silascopathic_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)