Login

Tom_imp · 04-08-2021, 10:22 PM

Hi everyone,

Just got a 2013 CB1100 after shopping for years and I thought I'd get started with a likely dumb question:
Do the 4 mounting knobs (that's what i think they are) under the back half of the seat unscrew? They are very tight on mine and I don't want to break anything. It looks like the should accept an allen wrench. I am trying to figure out my options for a sissy bar/luggage rack so if anyone has options they like other than making one, feel free to share that too.

On another note. DMV on NJ is so limited, this beauty has to sit in my garage for quite some time before I can even register it.

Thanks,
Tom

the Ferret · 04-08-2021, 10:30 PM

Howdy Tom and welcome to the forum.

For the life of me I can't remember what knobs you could be referring to, but I haven't had my seat off in years. Someone will come along shortly with the info you need.

GoldOxide_imp · 04-08-2021, 10:36 PM

Welcome to the Forum Tom!

**Cormanus** · 04-08-2021, 10:47 PM

Welcome to the forum, Tom. If you mean the knobs that hold the garnish rail on and look like you could attach a bungee cord to them, the answer is yes. They come undone.

Lord Popgun · 04-08-2021, 11:01 PM

Here is the part fiche for the garnish. There is a nut behind the Hook Bolt (item 11 and 12). https://www.partsfish.com/oemparts/a/hon...d3256/seat

And Welcome!

Tom_imp · 04-08-2021, 11:09 PM

Thanks for the welcomes. The things are not under under the seat. Don't have to take it off.

Now I think something is missing from them.

Thanks again. Hope the pic is there.

Tom

**Cormanus** · 04-08-2021, 11:26 PM

No. Nothing’s missing.

Tom_imp · 04-08-2021, 11:43 PM

(04-08-2021, 11:01 PM)Lord Popgun_imp Wrote: Here is the part fiche for the garnish. There is a nut behind the Hook Bolt (item 11 and 12). https://www.partsfish.com/oemparts/a/hon...d3256/seat

And Welcome!

Partfish looks awfully helpful thanks for that.

suhawk305 · 04-08-2021, 11:48 PM

Welcome to the forum Tom. Those are hook bolts as Popgun indicated. If you choose to install an OEM rack, the 4 hook bolts are to be removed and replaced with the rack’s mounting bolts provided. Here are the rack’s installation instructions for your information:
http://cdn.powersports.honda.com/documen...GC-A40.pdf

Tom_imp · 04-08-2021, 11:54 PM

(04-08-2021, 11:48 PM)suhawk305_imp Wrote: Welcome to the forum Tom. Those are hook bolts as Popgun indicated. If you choose to install an OEM rack, the 4 hook bolts are to be removed and replaced with the rack’s mounting bolts provided. Here are the rack’s installation instructions for your information:
http://cdn.powersports.honda.com/documen...GC-A40.pdf

Now it all makes sense. Thanks

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Two things I want not having much luck	Griz53_imp	10	957	10-08-2022, 02:41 AM Last Post: pdedse
	improved seat and 3 cm higher SEAT. the best reform	Alfgaxatico_imp	1	292	04-25-2021, 04:47 AM Last Post: GoldOxide_imp
	Things I have done list.cb1100rs 2017	Chris potato_imp	3	333	07-14-2019, 05:18 AM Last Post: Chris potato_imp
	Rear sets, seat and handle bar	CB Cycles_imp	10	801	02-17-2017, 10:58 AM Last Post: jamestkirk_imp
	Sometimes it's the little things	the Ferret	23	1,266	07-03-2015, 12:26 PM Last Post: JustPassinThru_imp
	Daytona cafe seat and Chic design rear fender	uscgmac_imp	23	1,414	04-27-2015, 05:56 AM Last Post: uscgmac_imp
	Givi Rear Rack vs. Honda OEM Rear Carrier	lagoje_imp	29	1,663	04-24-2015, 06:03 AM Last Post: specialist8
	It's the little things sometimes that really change the look	silascopathic_imp	10	617	08-12-2014, 10:27 AM Last Post: Gumby 1100_imp
	the little things I've done to my deluxe so far	ss2wheels_imp	6	608	04-27-2014, 05:12 PM Last Post: Cormanus
	The little things that bother us	the Ferret	18	993	08-05-2013, 04:17 PM Last Post: Buffalorider_imp

Threaded Mode things under the rear of the seat
Author	Message