1975 CB750K5

[RetroKitch_imp]

Ray,

My compliments on your stunningly beautiful restoration! What tires are you using? Dunlop K70's?

[Razor]

Thanks guys. Project took me about 17 months. Most of that time was consumed finding NOS/OEM parts.

Jim, I've got just over $5900 into the restoration. The engine was completely disassembled, inspected and new parts installed where needed. All replacement parts are NOS. When I got the bike (16yrs ago), I purchased a new seat, front fender & exhaust. The thought was these items would become obsolete. The hardest parts to source was the rear inner fender & the rubber license plate snubber on the rear fender.

Kitch, when I was ready to mount new tires; K70's weren't available, so I went with the Duro's. They have a similar tread pattern, in the stock sizes.

[Pterodactyl_imp]

Beautiful. Next time you are in Sydney drop in. I'll chain you in my garage with a good set of spanners and my Bonnie. It needs some work and you set a high standard.

Cheers, and once again, WELL DONE.

[ride4now_imp]

Beautiful!!!!!!!!!!!!!!!!!

[Offroad]

Nice! I had one just like it...same color...lots of fond memories!

[The Spaceman_imp]

If someone had told me back in '75 that a CB750 would become a prized collector bike, I'd have laughed out loud. There were just SO MANY of them.

I wonder what bikes we're riding today that will wind up in the same status?

[Firstfour_imp]

If someone had told me back in '75 that a CB750 would become a prized collector bike, I'd have laughed out loud. There were just SO MANY of them.

I wonder what bikes we're riding today that will wind up in the same status?

Similar to early Mustangs - they were ubiquitous and therefore often trashed. And tons of old 750's suffered the same fate, or turned into hideous choppers or whatever. But it seems sometimes an iconic design can overcome the lack of rarity.

[The Spaceman_imp]

Thanks guys. Project took me about 17 months. Most of that time was consumed finding NOS/OEM parts.

Jim, I've got just over $5900 into the restoration. The engine was completely disassembled, inspected and new parts installed where needed. All replacement parts are NOS. When I got the bike (16yrs ago), I purchased a new seat, front fender & exhaust. The thought was these items would become obsolete. The hardest parts to source was the rear inner fender & the rubber license plate snubber on the rear fender.

Kitch, when I was ready to mount new tires; K70's weren't available, so I went with the Duro's. They have a similar tread pattern, in the stock sizes.

Are you going to get a CB1100? Or do you already have one? I didn't see one in your sig line.

Note to everyone taking parts off your '13 and '14 CBs: wrap them up and put them away! If you don't want to mess with them, list them here and pass them on to someone who will.

[Razor]

The local dealer didn't have a 2014 Standard in stock, so it's on order. Hope to have it in 2-3 weeks.
+1 on saving the original parts. You'd be amazed what they'll be worth in the future.

Honda isn't bashful about raising prices on parts. A rear brake rotor on the Rune went from $110 to $225.

[wildezt_imp]

Man.. she is beautiful..wow