Posts: 101
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2017
So I just picked up my 2014 CB1100 and on the way home (2hr ride) I discovered a very definite whine at 60 mph. Doesn't matter what gear the whine is only at 60. It sounds like it is in the front sprocket area. Is the front sprocket bolt a standard counter clockwise to loosen bolt? A sprocket change is my first try since the bike only has 3K on the clock.
The new bike...
[url=http://s126.photobucket.com/user/cwwskw/media/9402020a-ca8c-4cd7-8e20-5912696f2ec1_zpsolyleuhs.jpg.html]
Posts: 23,474
Threads: 697
Likes Received: 584 in 261 posts
Likes Given: 767
Joined: Apr 2025
First off welcome to the forum.
Check and make sure chain is lubed. SOmetimes a dry chain will make a whining sound at speed.
Posts: 101
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2017
Better Pic...
[url=http://s126.photobucket.com/user/cwwskw/media/9402020a-ca8c-4cd7-8e20-5912696f2ec1_zpsolyleuhs.jpg.html]
Posts: 101
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2017
Lubed up the chain and took the bike back out. Apparently chains do require lube. The noise was gone.
The previous owner apparently didn't keep it lubed. I should have carried some with me and sprayed it before the trip.
Posts: 16,295
Threads: 347
Likes Received: 845 in 465 posts
Likes Given: 978
Joined: Apr 2025
Posts: 73
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2017
Nice bikes! Welcome!
2013 Honda CB1100
Posts: 346
Threads: 31
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2014
Hi there...
Keep an eye on the chain slack, this bike is quite fussy and can get noisy if its out of the sweet spot, I've noticed.
Posts: 1,954
Threads: 92
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Sep 2014
Nailed it, ferret.
Posts: 23,474
Threads: 697
Likes Received: 584 in 261 posts
Likes Given: 767
Joined: Apr 2025
These chains don't require a lot of lube, just a shot every now and then when they get dry or after a rain. IT's mostly to lube the contact between points between the chain link plates and the sprockets, and to keep rust at bay.
Posts: 661
Threads: 24
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2015
But they do require a significant amount of engine oil, that is if you want to keep yourself and garage lubed as well, like Ferret. 😬 good call!
Sent from my Moto G (5) Plus using Tapatalk