HOW OEM IS YOUR CB ?

[Vic_imp]

pretty much OEM.
a seat cover, top case, windshield, grips and bar end weights. oh, taped wheels.

[Cormanus]

Vic, the website your photo is hosted on doesn't allow a hot link, at least to that picture.

[tommymck]

Just for fun and look, no competition and no winner will be declared.

How original is your CB rules:
* no visual mods, tires, gaiters, RLET's = do not care
* OEM upgrade/accessories 2010-2019 = OK
* aftermarket added accessories = OK, not replacements
* at least one pic is mandatory. Limit to three.
* aftermarket: wheels, mirrors, exhaust, pegs, handle bar, lights, seats, fender eliminator, cafe project = sorry, no
* cannot list everything = common OEM sense

My OEM upgrade/accessories: 16.8 L tank, rear rack, engine guards
Aftermarket accessories : side racks/panniers by SW Motech, top box by Givi, windshield by National Cycle, RAM attachments

Since you mentioned tank..... For me, it was mainly a visual mod, but the 18+ liter tank really has added to the utility of the bike...



The seat was also a major upgrade in my opinion



And finally, the tourmaster bags are fantastic...

[Cormanus]

tommymck, that's a CB750 with an 1100cc mill!

[Randy B]

Factory JDM 2011 dark blue tank
Honda rear rack and top box w/one key system (keyed to the bike)
Honda crash bars
K&N air filter
Road Comet RC1 in matching dark blue and matching stripe with tall windscreen
Custom fit Corbin seat

I forgot to add the black peg plates from a 2014.

[GoldOxide_imp]

Just for fun and look, no competition and no winner will be declared.

How original is your CB rules:
* no visual mods, tires, gaiters, RLET's = do not care
* OEM upgrade/accessories 2010-2019 = OK
* aftermarket added accessories = OK, not replacements
* at least one pic is mandatory. Limit to three.
* aftermarket: wheels, mirrors, exhaust, pegs, handle bar, lights, seats, fender eliminator, cafe project = sorry, no
* cannot list everything = common OEM sense

My OEM upgrade/accessories: 16.8 L tank, rear rack, engine guards
Aftermarket accessories : side racks/panniers by SW Motech, top box by Givi, windshield by National Cycle, RAM attachments

PB: I think you forgot the seat towel.

PB: I think you forgot the seat towel.
..GO, you are leading 1:0, but you missed fenda extenda

PB: I think you forgot the seat towel.
..GO, you are leading 1:0, but you missed fenda extenda

Heh, but I don't understand.

[GoldOxide_imp]

Honda OEM mods:
CB1100 Type II handlebars
CB1100 Japanese market seat
CB1100 chrome instrument gauge covers
RLETs

Non-OEM mods:
Staintune slip-on exhaust

I also have the Honda OEM rear rack for my CB but prefer the looks of the bike without it so it is only used as needed.

Some bike models have "bad angle shots".

I don't think there is a bad angle shot on the CB1100. Your image, Guth, is one of the best angles.

I agree that the carrier does impede its beauty.

[Rocky_imp]

Rocky, where did you get the magnetic tank pads?

Mine's stock except for:

• Superbrace that I won in a competition on the forum
• Daytona rack to support a Givi Top Box
• Healtech gear position indicator
• phone mount
• repainted side covers

I bought the magnetic sheets from mag-knight.com in the U.S. and cut them from a pattern somebody posted here a couple of years ago.

Oh yes, I forgot to mention in my first post that I replaced the side covers with a matching painted set from Mr. T. I didn't have them when this picture was taken a couple of years ago, but they can be seen in my original post.

[Vic_imp]

used to link pics from there.

[GoldOxide_imp]

used to link pics from there.

Thanks Vic. However I get:

Error 1011 Ray ID: xxxxxxxxxxx • 2019-02-12 12:03:44 UTC
Access denied
What happened?
The owner of this website (http://www.picturelongmont.com) does not allow hotlinking to that resource (/plcontent/atCrockersOct2017.png).