01-18-2021, 02:01 PM
Check under "How To" section, there's a tread on both types of fuel hose connector.
Yes, the 2017 connector is different from previous models (as mentioned by PB).
The white clip should never be removed, however, needs to be pushed down as per link below.
(To release the connector "Push" back the thinner white tab with the thumb and "Press" it down.
Then pull back the black connector housing with a slight twist.)
Regards
Alain
http://cb1100forum.com/forum/showthread....light=fuel
Yes, the 2017 connector is different from previous models (as mentioned by PB).
The white clip should never be removed, however, needs to be pushed down as per link below.
(To release the connector "Push" back the thinner white tab with the thumb and "Press" it down.
Then pull back the black connector housing with a slight twist.)
Regards
Alain
http://cb1100forum.com/forum/showthread....light=fuel
