04-23-2021, 07:01 PM
Thanks Max. So, just thinking out loud here (I’m clearly not going to do it). By Honda setting the limits as 1” to 1 1/4” in theory it only NEEDS to be 8mm (sorry for mixing measurements BTW) to allow sufficient slack in the drivetrain before it locks up.
In other words there is a decent safety margin built in here so unless you do your chain stupidly tight there should be no problems, at all.
In other words there is a decent safety margin built in here so unless you do your chain stupidly tight there should be no problems, at all.
