11-03-2021, 07:14 AM
Max, you may want to direct Gordo to your TPS tests and throttle calibration
I think you had more than item C in this post
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=66]https://cb1100forum.com/forum/showthread...20&page=66
C. Follow TPS diagnostics per pages 5-23 thru 5-25 of the FSM. Note comments in posts 615, 618 & 622, especially see Max's post 632 regarding TPS output test.
If output is not 0.5 VDC, loosen fasteners (ignition on, engine NOT running) and rotate TPS to obtain 0.5 VDC, throttle closed. After adjusting TPS throttle closed output, do a throttle calibration with ignition on, engine NOT running, by SLOWLY opening and closing throttle, 2-3 times.
Post 615 & 618
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=62]https://cb1100forum.com/forum/showthread...20&page=62
Post 622
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=63]https://cb1100forum.com/forum/showthread...20&page=63
Post 632
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=64]https://cb1100forum.com/forum/showthread...20&page=64
Also check ALL vacuum hoses and Ts are intact.
I think you had more than item C in this post
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=66]https://cb1100forum.com/forum/showthread...20&page=66
C. Follow TPS diagnostics per pages 5-23 thru 5-25 of the FSM. Note comments in posts 615, 618 & 622, especially see Max's post 632 regarding TPS output test.
If output is not 0.5 VDC, loosen fasteners (ignition on, engine NOT running) and rotate TPS to obtain 0.5 VDC, throttle closed. After adjusting TPS throttle closed output, do a throttle calibration with ignition on, engine NOT running, by SLOWLY opening and closing throttle, 2-3 times.
Post 615 & 618
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=62]https://cb1100forum.com/forum/showthread...20&page=62
Post 622
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=63]https://cb1100forum.com/forum/showthread...20&page=63
Post 632
[url=https://cb1100forum.com/forum/showthread.php?tid=8120&page=64]https://cb1100forum.com/forum/showthread...20&page=64
Also check ALL vacuum hoses and Ts are intact.
