04-26-2022, 11:13 PM
I used to work for a company that made digital instrumentation, but nothing that would be practical for a street motorcycle. I get that it wants to know the number of cylinders so that it can take the ignition pulse signal, and correctly parse it out to determine an accurate RPM.
The tire rollout measurement would allow it to take the wheel speed sensor pulses to determine accurate vehicle speed.
Are you getting an accurate RPM? Doesn’t look like an obvious function for setting the redline based on what the RPM reading is. Can you find a YouTube video for that model of display to see how it is programmed? A generic programmable digital dash that isn’t specific to a particular engine usually takes the ignition signal and displays RPM, but allows the user to determine the redline as it doesn’t know what particular engine it’s getting the signal from.
If you aren’t too hampered by budget, you might take a look at what AIM has for your application.
The tire rollout measurement would allow it to take the wheel speed sensor pulses to determine accurate vehicle speed.
Are you getting an accurate RPM? Doesn’t look like an obvious function for setting the redline based on what the RPM reading is. Can you find a YouTube video for that model of display to see how it is programmed? A generic programmable digital dash that isn’t specific to a particular engine usually takes the ignition signal and displays RPM, but allows the user to determine the redline as it doesn’t know what particular engine it’s getting the signal from.
If you aren’t too hampered by budget, you might take a look at what AIM has for your application.