06-14-2022, 01:19 PM
GO i used a 4 pole cable with different colors, they have fitting " header connectors " and one header connector has 4 thin wires which fit into the iacv connector and has 2.5 mm pin spacing.
The shield of the cables is connected to the bike chassis ( battery ground ) through the red clip and the others tap into two of the four wires.
And a closeup of the connectors;
This way i can get easy access to the connections
The two inner wires connect to coil 1 and the outside wires connect to coil2, i think i used yellow and orange
The shield of the cables is connected to the bike chassis ( battery ground ) through the red clip and the others tap into two of the four wires.
And a closeup of the connectors;
This way i can get easy access to the connections
The two inner wires connect to coil 1 and the outside wires connect to coil2, i think i used yellow and orange