05-19-2013, 08:59 AM
Here is what I added to round out my tool kit.
Yes I ordered another bag, but I'm glad I did because everything was really tight and the stuff that came with the bike would not fit in with the stuff I ordered. If you don't want it all I still strongly suggest the spark plug socket and the wrench to turn it due to the tight nature of these cylinder heads.
![[Image: ced1e14406524c31f6016f8f30e384a6.jpg]](https://cb1100forum.net/forum/uploads/imp/201305/ced1e14406524c31f6016f8f30e384a6.jpg)
So basically there are 3 wrenches, the flathead screwdriver, the spanner for the rear shocks, the handle extension for the spanner, both axle nut wrenches, the spark plug socket and an extra bag.
That would make a total of 15 pieces with what came with the bike.
Yes I ordered another bag, but I'm glad I did because everything was really tight and the stuff that came with the bike would not fit in with the stuff I ordered. If you don't want it all I still strongly suggest the spark plug socket and the wrench to turn it due to the tight nature of these cylinder heads.
![[Image: ced1e14406524c31f6016f8f30e384a6.jpg]](https://cb1100forum.net/forum/uploads/imp/201305/ced1e14406524c31f6016f8f30e384a6.jpg)
So basically there are 3 wrenches, the flathead screwdriver, the spanner for the rear shocks, the handle extension for the spanner, both axle nut wrenches, the spark plug socket and an extra bag.
That would make a total of 15 pieces with what came with the bike.
