07-10-2014, 05:34 AM
I don't see many straight answers to the original question. The CB1100 is a bit porky. The stock, non ABS 2013 CB1100 is about 530 lbs wet, with just a bit of gas. If I wanted to lighten mine, I suggest the following:
1) TI exhaust with no cat could save about 15 lbs.
2) Lighter 17" wheels - save about 20 lbs.
3) TI axles, nuts and bolts - about 7 or 8 lbs.
4) Shorai battery - about 5 lbs.
5) aluminum body shocks - about 5 or 6 lbs.
All these are rough estimates taken from other bikes I have lightened. Many of these mods are very expensive.
I intend to add the Arrow slip-on which is stainless, not TI and aluminum shocks and will report on the weight savings. I do weigh 265lbs, so everything is relative!
1) TI exhaust with no cat could save about 15 lbs.
2) Lighter 17" wheels - save about 20 lbs.
3) TI axles, nuts and bolts - about 7 or 8 lbs.
4) Shorai battery - about 5 lbs.
5) aluminum body shocks - about 5 or 6 lbs.
All these are rough estimates taken from other bikes I have lightened. Many of these mods are very expensive.
I intend to add the Arrow slip-on which is stainless, not TI and aluminum shocks and will report on the weight savings. I do weigh 265lbs, so everything is relative!
