05-27-2021, 09:21 PM
Those are good points Olof. I would think it could be a lot of things-tires/wear balance, loose head bearings, wheel alignment or not true, forks not aligned properly. IDK. Remember one member had a swingarm that was loose in the frame and had to deal with that. He had to shim it to get it right.
When these bikes first came out in the US and UK someone started a UK board. This board had not been started then. Ferret and I were on it, and some others. Anyway one guy in the UK had either a noise or vibration that turned out to be (we think, Honda was cagey about it) counter balancer problem. They pulled the engine and replaced the balancer, or something, and he was good. I’d check as many things as I could.
That UK CB site never had much traffic and once Guth put up this site, it faded away and this one took off.
When these bikes first came out in the US and UK someone started a UK board. This board had not been started then. Ferret and I were on it, and some others. Anyway one guy in the UK had either a noise or vibration that turned out to be (we think, Honda was cagey about it) counter balancer problem. They pulled the engine and replaced the balancer, or something, and he was good. I’d check as many things as I could.
That UK CB site never had much traffic and once Guth put up this site, it faded away and this one took off.
