considering the Honda heated grips for the CB1100

[the Ferret]

I have the Oxford Premium Heated Touring grips on my other bike. 5 heat settings 30% 40% 50% 75% and 100% although I have never used anything more than 40% so far down into the high 30's for temps. Easy plug and play install although the inner tubes MAY take some fiddling. Did on mine, didn't on my brothers. $89 retail. Hardware is not as "clean" as factory grips with a controller on an arm and a rubber arm on throttle and clutch grips you have to make sure won't interfere with levers. Not a big deal, but you must be aware. Installation was about 45 mins to an hour total if you don't have to fiddle. I must say they work really well, putting out a lot of nice warm heat. They do measure 1/4" larger n circumference than my 719 Gel grips (and the stock Honda grips, although that is one of the first things I upgrade on all my bikes) and you can definitely feel it. I like smaller grips (stock diameter is fine with me) and these feel "too big" but I can live with it for the heat.

[url=http://smg.photobucket.com/user/theferret111/media/ST%20heated%20grips%20003_zps0poc75gh.jpg.html]

[url=http://smg.photobucket.com/user/theferret111/media/ST%20heated%20grips%20004_zpshlcpeyc3.jpg.html]

[url=http://smg.photobucket.com/user/theferret111/media/ST%20heated%20grips%20005_zpsuut2ftcv.jpg.html]