05-21-2023, 05:58 AM
Thanks guys, really! you confirm what I anyway felt like (not) doing.
But our friendly down-under moderator reported (I think) that he had it done by the book, and each time the valves were somewhat off.
So here is my question : what if I open the cyl head, and just measure the clearance without taking the cams out. At least one time between 15 and 20 thousand? Bad idea ?
But our friendly down-under moderator reported (I think) that he had it done by the book, and each time the valves were somewhat off.
So here is my question : what if I open the cyl head, and just measure the clearance without taking the cams out. At least one time between 15 and 20 thousand? Bad idea ?
