02-17-2016, 03:34 AM
(02-17-2016, 01:46 AM)Lord Popgun_imp Wrote: Jedd, on the '13 the nut is 32mm and on the '14 it is 27mm. I don't know/remember the axle head size.
22 on the 14 have to look it up for the 13
And I believe spec on tightening on the 14 is 65 ft lbs or there abouts.
The spec on my FZ1 was 108 ft lbs for the axle nut and I did that with these toy tools...at least loosening. I couldn't get it to 108 on tightening but I got it "good and tight" . Couldn't have measured it on a trip anyway since I don't pack a large torque wrench, no matter the quality of the socket and breaker bar you are carrying. Truth is I only tightened it to 90 ft lbs WITH a torque wrench and that was godawfully tight. Never understood that high spec on the FZ.
These tools IMO are for emergencies on the road, not for common maintenance.